Log in
Forum
Topic

Composite Wood Documentation

NC-v4 EQc2: Low emitting materials
posted by Vanessa Nelson on Apr 2, 2020, 12:24 pm

Is a manufacturer provided product Info sheet stating a plywood product does not contain urea formaldehyde sufficient documentation for the composite...

Last reply: Keith Robertson, Jul 29, 2020, 5:00 pm

Energy model for multiple buildings

Hospitality-NC-v4 EAp2: Minimum Energy Performance
posted by Nikos Tsitsikas on Jul 29, 2020, 10:41 am

Hi all,

As we are working on a Hospitality project which consists of several groups of typical bungalows, we are in the process of planning the most efficient way to build the energy model...

Last reply: Marcus Sheffer, Jul 29, 2020, 1:51 pm

Multiple Pilot Credit (EApc111 7 EApc95) Implementation on EAc2

NC-v4 EAc2: Optimize Energy Performance
posted by Rahil Shah on Jul 29, 2020, 12:06 pm

Hello Everyone, 

I hope everyone is doing well and staying safe.

I have a LEED-NC v4 project. For energy performance prerequisite and credit (EAp2 and EAc2), we are using...

Last reply: Marcus Sheffer, Jul 29, 2020, 1:48 pm

Outlier high TVOC measurements as max?

EBOM-v4.1 EQc1: Indoor Environmental Quality Performance
posted by Alexis Doyle on Jul 9, 2020, 10:27 pm

Hi,

In a 12 story building that we operate, one floor is tenanted with dentist offices. This floor consistently measures higher...

Last reply: Alexis Doyle, Jul 29, 2020, 1:15 pm

"in close proximity"

NC-v4.1 LTc8: Electric Vehicles
posted by emily reese moody on Jul 23, 2020, 3:37 pm

Anyone have any guesses as to what the acceptable proximity is to meet this portion of the requirements?

"The raceway shall originate at the main service or subpanel and shall...

Last reply: emily reese moody, Jul 29, 2020, 12:34 pm

EVSE and ADA parking spaces

NC-v4.1 LTc8: Electric Vehicles
posted by Bryna Dunn on May 24, 2019, 10:17 am

Has anyone submitted a project that includes ADA spaces in the spaces served by EVSE?  For example, if a total of 3 charging stations are required on a project, and one of those is placed at an...

Last reply: emily reese moody, Jul 29, 2020, 11:58 am

changes within v4.1 requirements

NC-v4.1 LTc8: Electric Vehicles
posted by emily reese moody on Jul 29, 2020, 11:15 am

Emily Purcell Green Building Specialist Solomon Cordwell Buenz LEEDuser Expert 138 thumbs up July 29, 2020- 11:36 am Discussed this earlier here:  https://leeduser.buildinggreen.com/forum/evse-iso-15118-compliance   Looking back, my last comment was abut the credit library not showing the newest requirement, but now it is consistent with the 1/2020 addenda. So I guess we can chalk that up to a credit iibrary redesign issue.  Log in or register to post comments emily reese moody Sustainability Director, Certifications & Compliance Jacobs LEEDuser Expert 229 thumbs up July 29, 2020- 11:55 am Ooh, thanks. Very...

Last reply: emily reese moody, Jul 29, 2020, 11:55 am

EV Charging Stations

Healthcare-v4 LTc8: Green vehicles
posted by Dianne Herrin on Jun 5, 2017, 10:20 am

Hello - My client is preparing to purchase Tesla EV charging stations to meet LEED v4 requirements. These stations will work only with Teslas. I see nothing in the guidance to suggest that a...

Last reply: Keith Robertson, Jul 29, 2020, 10:29 am

Energy Model guideline for laboratory building- LEED v4 BD+C

NC-v4 EAp2: Minimum Energy Performance
posted by Amal Venugopal on Jul 29, 2020, 6:53 am

Hi All,

Is there any ASHRAE 90.1.2010 Appendix G Energy Model guideline for laboratory building?

Thanks..

Last reply: Marcus Sheffer, Jul 29, 2020, 9:36 am

Target Finder outside the US

NC-v4.1 EAp2: Minimum Energy Performance
posted by Davide Liviero on Jul 29, 2020, 5:52 am

Hello everyone,

I ahve read that for LEED v4 BD+C Target Finder results are not required for projects outside the USA. Is this aspect still valid for LEED v4.1?

Thank you in advance...

Last reply: Marcus Sheffer, Jul 29, 2020, 9:35 am