Hi,

We are evaluating the LEED certification potential of a new winery that will be built in Portugal (using the rating system LEED BD+C: New Construction and Major Renovation)....

Paula Melton Editorial Director BuildingGreen, Inc. LEEDuser Moderator 180 thumbs up November 6, 2018- 12:08 pm Hi, Konstantina! Wondering if this thread might help: https://leeduser.buildinggreen.com/forum/u-value-f-factor Log in or register to post comments Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5867 thumbs up November 6, 2018- 12:25 pm Slabs are usually insulated around the edge, both in under the slab and down along the outside. The F-factor accounts for the edge treatment since this is where most of the heat loss occurs. Think of it like a whole assembly U-value of sorts. Some...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5867 thumbs up November 5, 2018- 3:10 pm Not sure. You might have better luck on the eQUEST User's forum at onebuilding.org  Log in or register to post comments ...

I am working on a sanitation maintenance garage, which is a major renovation project, and I plugged the necessary info at EPA Target Finder. The project property type I selected was Public...

Hello,

I have following questioning:

My proposed building is nonresidential 710.000 ft2 and the Heating/ Cooling production is made with Chillers and Heat pumps.

My proposed...

Hello to all,

I have following questions concerning  ASHRAE 90.1.2010 and receptacle loads:

In Ashrae  ASHRAE 90.1.2007 the energy  from receptacle loads had to be the 25% of the...

Hello to all,

I have following questions concerning  ASHRAE 90.1.2010 and unmet hours:

1. The proposed building  according to G3.1.2.3 shall not exceed the 300  unmet hours. The...

Hello,

An office building project has a small space dedicated to a Datacenter (under 20% of GFA). It was designed to be Tier 3 certified with all the requirements that that entails. (...

We are modeling a large data center for LEED V4 using the ASHRAE 2010 appendix G as the baseline. The selection of baseline system is not completely clear to me and I was hoping for some guidance...

Hello to all,

I am trying to build the baseline building for a European city which belongs at the climate Zone 3 and I am trying to select economizer from Ashrae 90.1 Table G3.1.2.6B. ...