Log in
Forum » Germany
Loading...
Topic

Efficiency of the chiller

NC-2009 EAp2: Minimum Energy Performance
posted by Dandan Li on Jul 15, 2016, 9:40 am

Hello all,

we are going to use ASHRAE 90.1-2010 for our LEED v2009 project in Germany. One problem pops up recently. The cooling system we will use in the project is a split cooling system...

Last reply: Jean Marais, Jul 21, 2016, 5:58 am

Possible Points for Europe?

NC-2009 SSc4.1: Alternative transportation - public transportation access
posted by Sebastian Stumvoll on Jun 7, 2016, 4:08 am

We are pursuing LEED credits for a Workshop/Office Building in Munich Germany. The projekt site is located less than a 1/2 mile...

Last reply: Charalampos Giannikopoulos, Jun 28, 2016, 4:17 pm

Fuel-efficient vehicles- EURO 6?

EBOM-2009 SSc4: Alternative Commuting Transportation
posted by Natascha Altensen on Aug 11, 2015, 9:20 am

For the documentation of fuel-efficient vehicles in Germany, we were wondering if a vehicle meeting the EURO 6 limit is eligible?

Within the guidelines for ACP in Europe for BD+C, it is...

Last reply: Vivien Fairlamb, Jun 14, 2016, 6:21 am

View Preserving Automated Shades

EBOM-2009 IEQc2.4: Daylight and Views
posted by Maya Donelson on Mar 22, 2016, 9:23 am

For Option 1, Path 2 using the daylight and views calculator we are trying to a factor that meets the requirement. The building has exterior automated horizontal louvers (not perforated), which...

Last reply: Melissa Kelly, Mar 28, 2016, 1:41 pm

Shower in Units of gpc or USgpm in Form WEp1

CS-2009 WEp1: Water Use Reduction
posted by Panagiota Dadinou on Jan 19, 2016, 4:14 am

Hello,

a question concerning WEp1

Could I use the flow rate in Units of gallons per cycle (gpc) instead of USgallons per minute (USgpm) for the Shower as Fixture Family in Table...

Last reply: Carlie Bullock-Jones, Jan 21, 2016, 9:46 am

net area vs gross area (simulation) in IEQc8.1

CS-2009 IEQc8.1: Daylight and views - daylight
posted by Panagiota Dadinou on Jan 12, 2016, 8:12 am

Hello,

a question concerning IEQc8.1 & IEQc8.2 .

Can we use the net floor area instead of...

Last reply: Eddy Santosa, Jan 12, 2016, 4:51 pm

net area vs gross area (simulation)

CS-2009 IEQc8.1: Daylight and views - daylight
posted by Panagiota Dadinou on Jan 12, 2016, 8:02 am

Hello,

a question concerning IEQc8.1 & IEQc8.2 .

Can we use the net floor area instead of...

Default Fixture use for a School Project (shower)

Schools-2009 WEp1: Water Use Reduction
posted by Markus Henning on Dec 3, 2014, 2:55 am

I am working on a school project and actualy calculating WEp1. I am wondering that the default fixture use for a school indicate no daly uses for a shower for students. Also the LEEDonline form...

Last reply: Carlie Bullock-Jones, Dec 30, 2015, 10:55 am

Interior Paints and Coatings

NC-v4 EQc2: Low emitting materials
posted by Reinhard Oppl on Dec 16, 2015, 8:51 am

Who can help to clarify? I am in a discussion with consultants who state that for paints and coatings, wet-applied on-site on walls, floors and ceilings, the...

Last reply: Michelle Halle Stern, Dec 18, 2015, 8:23 am

Option 3-Approach 2 Commuter Survey- representative selection

EBOM-2009 SSc4: Alternative Commuting Transportation
posted by Christian Bösselmann on Oct 22, 2015, 4:32 am

In conducting the commuter survey according to Option 3 / Approach 2 I am would very much appreciate your feedback on the following topics.

The multifunctional building is occupied by 1250...

Last reply: Christian Bösselmann, Nov 24, 2015, 3:19 am