Log in
Forum
Loading...
Topic

WS Label Required for Aerators

NC-v4 WEc2: Indoor water use reduction
posted by RDK E&S on Nov 4, 2019, 1:29 pm

We received a LEED comment on a residential project where we installed flow restrictors to reduce the faucet flow rate to 0.5 gpm. The 1.5 gpm flow restrictor is WS labelled but the installed 0.5...

Last reply: David Posada, Nov 4, 2019, 7:48 pm

process water- restaurant?

NC-v4 WEc4: Water metering
posted by Agata Mozer on Oct 29, 2019, 8:15 am

We have a New construction project - offices with a restaurant on the groud floor. Does anyone know if water use for the purpose of the restaurant can be considered process water?

Last reply: Tristan Roberts, Nov 4, 2019, 7:28 pm

Stormwater harvesting for car washing

NC-2009 SSc6.1: Stormwater design - quantity control
posted by Margarita Zaritskaya on Nov 1, 2019, 4:02 am

Hi all,

We have an office building with stormwater collector targeting use greywater at car washing station within the building. Can this comply with harvesting water for custodial use as...

Last reply: Tristan Roberts, Nov 4, 2019, 7:23 pm

Equipment Power Density for Plant Room

CS-v4.1 EAc2: Optimize Energy Performance
posted by Chi Hung Yip on Oct 18, 2019, 5:38 am

I need to input a figure for the equipment power...

Last reply: Marcus Sheffer, Nov 4, 2019, 6:13 pm

Building Envelope Commissioning

NC-v4 EAc1: Enhanced Commissioning
posted by Chris Bennett on Feb 16, 2018, 5:29 pm

Hello All, 

Has anyone gone through the process of building envelope...

Last reply: , Nov 4, 2019, 3:22 pm

ROhS Directive

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Gustavo De las Heras Izquierdo on Feb 27, 2014, 8:32 pm

Is the ROhS Directive a valid approach for demonstrating the cable meets the credit requirements?

Please check this out: http://www....

Last reply: Gustavo De las Heras Izquierdo, Nov 4, 2019, 12:48 pm

Recomendations when Selecting Air-Conditioning Equipment to Maximize Credits

NC-v4 EAc2: Optimize Energy Performance
posted by Josh Beauchemin on Oct 23, 2019, 3:17 pm

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5553 thumbs up November 1, 2019- 10:05 am This is far to much to respond to in a single post. I would suggest that you break up your issues/questions into separate posts and place them in the appropriate forums. Log in or register to post comments Josh Beauchemin LEEDuser Basic Member November 4, 2019- 11:09 am Thanks Marcus, I'll try that! Log in or register to post comments ...

Last reply: Josh Beauchemin, Nov 4, 2019, 11:09 am

7.6.1.2 Extracting Fan Power – Baseline Design

NC-v4 EAc2: Optimize Energy Performance
posted by Amal Venugopal on Nov 4, 2019, 8:59 am

Hi Sir,

Greetings!

The following content is copied from,

Page No,38 of...

Leed prerequistes

LEED Rating System Selection
posted by jason moy on Nov 4, 2019, 8:50 am

if you are not after the a certin leed catagory credits, do you still have to meet the prerequistes for all categories? For example, in and O&M existing building project, if you are going for...

Last reply: Paula Melton, Nov 4, 2019, 8:56 am

7.6.1.2 Extracting Fan Power – Baseline Design

NC-v4 EAp2: Minimum Energy Performance
posted by Amal Venugopal on Nov 3, 2019, 8:50 am

Hi Sir,

Greetings!...

The following content is copied from https://www.energizect.com/sites/default/...