We would like to know if it is possible to start the flush out (and maybe even finish it) before all permanent furniture is installed. The furniture is fabricated in a shop outside the site and...

Dear all,
We have a project where we intend to pursue Option 1 Path 1, We will install furniture after completing the flush-out, but the architect is concerned about the carpet...

We have a project that is an expansion to an existing facility. It is NOT an addition. Though the majority of the existing facility was unrenovated, with the exception of one ventilation system...

I'm looking for some help with the area to be used for a flush out calculation. The gross project area included in PI-Form 3 includes electric/janitor closets, core toilets, mechanical room and...

For performing testing under Option 2 (...

I am wondering if IBC Group S-1 Occupancy zones are required to be tested per IEQc3.2.
On this project (vehicle maintenance facility), the specific zones within the S-1 classification are...

to the v4 question, please do it over on the v4 forum. Thanks! Log in or register to post comments ...

We are currently pursuing this credit using the flush out option Path 1. We are capable of maintaining the temperature in at least 60°F and RH no higher than 60% since the ventilation systems are...

Currently doing a LEED v.2009 project and are looking to pursue IEQc3.2, Option 2. We got a question from the air quality tester asking about the specific requirements for testing. The testing...

We have 4 A/C Units providing air conditioning to a building, two of them are 100% OA units and two of them are providing the total air supply cfm (OA + recirulated air) is 7000 cfm and 8600...