I am working on a project that has installed signage near major entrances that prohibits smoking within 25 feet of all doors and windows. However, designated smoking areas beyond the 25 foot...

I need to know if I should place filter on the smoking zones' exhaust duct?
If yes, should it be HEPA filter as it is placed on the schematic diagram in the reference guide?

Thanks...

For Mid-rise residential buildings it is required to perform a blower door test according E779-03 but international...

We are currently working in a project located in New York City. The owner owns the entire floor where the project is located. Because of thet I have a couple of questioss:

1- As what...

When can the blower door test take place? Can it be done when the drywall has been completed or do the cabinetry and appliances need to be installed as well?

Hello, I have a project that does not allow smoking within the building. However, there are small one room kiosks outside the building that allow smoking. These small structures are more than...

We are assessing the possibility of pursuing LEED Certification for a Complex of four buildings at the Border Crossing between Chile and Argentina. One of these buildings is residential and will...

Hi,
Our project is mixed use commercial office building including hotel. There are about 100 guest rooms on hotel floors, and smoking is permitted in 30% of these rooms. Is it acceptable to...

We have a medium high-rise residential tower on Abu Dhabi, 4 apartments each floor, the return and supply for each flat are not connected with each others, the fire damper is located above the...

Hi,
On the credit form I must upload blower door test results but this credit is a design phase credit and the test is only after construction is complete. Can someone share how they solved...