Log in
Forum » NC-v4 EQc2
Topic

CDPH v1.2 (2017)

NC-v4 EQc2: Low emitting materials
posted by Kristen Magnuson on Jun 22, 2017, 5:17 pm

Does the USGBC accept products that have been tested for emissions in accordance with CDPH v1.2 (2017) for compliance with the low-emitting materials credit? This is the newer version of CDPH v1....

Last reply: Elizabeth Kertesz, Jan 28, 2019, 11:13 am

Materials inside the building

NC-v4 EQc2: Low emitting materials
posted by Konstantina Kalliakoudi on Jan 23, 2019, 3:18 am

Hello to all,

In my understanding this credit "Low emitting materials" concerns materials inside the building, and not outside. Is this right?

Thanks

Furniture always in scope of work?

NC-v4 EQc2: Low emitting materials
posted by Raphael Sperry on Jul 9, 2015, 2:45 pm

I've noticed that the LEED reference guide says "Furniture is considered part of the scope if it is installed at the time of occupancy, regardless of who specified or provided it." And I've...

Last reply: Sophie Kerr, Jan 22, 2019, 7:20 pm

How does EPA Method 24 compare to CDPH Standard Method v1.1-2010?

NC-v4 EQc2: Low emitting materials
posted by Summer Gorder on Jan 17, 2019, 7:10 pm

We finally found a Static Control Epoxy Coating for a concrete floor that meets the...

Last reply: Reinhard Oppl, Jan 18, 2019, 4:21 pm

Budget Calculation Method- can Option 1 be used for the other categories where all products are compliant

NC-v4 EQc2: Low emitting materials
posted by Summer Gorder on Jan 17, 2019, 6:23 pm

I have never had to utilize the Budget Calculation Method for compliance using my GBIM verification system, but have one category that may not comply for a large public project pursuing LEED...

Polyurethane upholstery foam

NC-v4 EQc2: Low emitting materials
posted by Emily Purcell on Jan 15, 2019, 5:03 pm

Hi,

I posted recently about how to address built-in seating assembled on site (the answer is, it is part of a wall...

Last reply: debra a. lombard, Jan 17, 2019, 11:38 am

Intumescent Paint and General Emission Evaluation requirements

NC-v4 EQc2: Low emitting materials
posted by Michael Munn on Nov 9, 2016, 4:31 pm

Do the General Emissions criteria for Paints and Coatings apply to intumescent flame retardants for structural elements? We've had difficulty finding products that meet (or report) compliance....

Last reply: Craig Wilson, Jan 15, 2019, 7:41 pm

Clarify the requirement for offsite coatings (and/or coating that will be covered)

NC-v4 EQc2: Low emitting materials
posted by Summer Gorder on Jan 10, 2019, 3:07 pm

The team as me to clarify the definition of Primers, Sealers, and Undercoaters in the LEED description?  Does that include any coating that gets covered with an additional...

Last reply: Craig Graber, Jan 10, 2019, 4:30 pm

Built-in seating in Option 1

NC-v4 EQc2: Low emitting materials
posted by Emily Purcell on Dec 12, 2018, 3:04 pm

Hi all,

I'm running into an unclear item in this credit regarding built-in furniture in Option 1. The project has built-in cabinetry and counters, which appear to be covered by the...

Last reply: Emily Purcell, Dec 26, 2018, 10:18 am

Low Emitting Material Documentation

NC-v4 EQc2: Low emitting materials
posted by Summer Gorder on Nov 17, 2018, 4:01 pm

If the manufacturer does not have documentation, is there a generic letter to distribute to manufacturers that will comply with verification needed for the...

Last reply: Summer Gorder, Dec 19, 2018, 1:26 pm