My building has four floors, and 4th flr is left empty for future use. I did not include it in simulation, so I got the comments from the reviewer: Revise the model as necessary to include all...

Hello everyone. May I ask 2 questions on option 1 in EQ credit-Daylight?

A) Assuming a project go for option 1 in EQ credit Daylight. In...

Hi!
We understand that all newly installed water fixtures must be WaterSense labeled. however, it seems only Tank-type toilet, Water-using urinals, Private lavatory faucets, and Showerheads...

Hello,

We have a 1 storey 30m high...

Our project in China is a K-12 school which consist of 2 learning buildings, a sport center and a performing center.
When we compare the ventilation rates calculated according to ASHRAE 62....

Hi
I am new to V4. There is a question about this credit. On the RG, page 75 further explanation, says that "project may......indicates has significant historic or cultural value". How...

Hello:
I am working on a convenience store applying for LEED CI Retail 2009 certification, the project plans to design two outdoor air-cooled condensing unit which would be used as the...

Our project is a high rise building, which consists of offices, bank, dining area and so on. Now it is under the LEED V3 CS review. I have a question about the spaces which are not normally...

Hi all,
I have a question in regard to the flowrate of faucet, whether it should be based on the 60psi specified by LEED or local water supply pressure. There have been a few discussions on...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5796 thumbs up August 16, 2016- 11:02 am Yes that will ensure that the tenant can meet this requirement if they pursue a CI certification. This prerequisite is related to the tenant scope of work and they need to meet these requirements if they pursue a CI certification. If you are doing a CS project please post your question in the applicable forum. Log in or register to post comments ...