Log in
Forum » NC-2009 IEQc4.2
Loading...
Topic

Primers- really?

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Keith Robertson on Apr 29, 2014, 10:12 am

In my opinion, LEED 2009 incorrectly categorizes primers. I know that the table issued with the 4/14/10 addendum clearly lumps primers into the GS-11 requirements. This I don’t understand. In...

Last reply: Jon Clifford, Apr 28, 2015, 5:42 am

VOC content for Shop applied finishes

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Jeremy Mendenhall on Jan 28, 2015, 10:40 am

We are new to the Leed program and wanting to make sure that we are following all of the guidelines, we have received some instruction however I'm trying to get confirmation that shop applied...

Last reply: John Albrecht, Apr 27, 2015, 6:37 pm

VOC Budget shortcut?

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Rick Farrell on Apr 21, 2015, 12:37 pm

We are a...

Last reply: Jon Clifford, Apr 23, 2015, 8:00 pm

aerosol line saver

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Lyle Axelarris on Apr 14, 2015, 7:06 pm

Has anyone considered reporting the use of aerosol "line saver"? This is the stuff sprayed over chalk lines during construction to preserve construction reference lines for layout. It's applied...

Last reply: Jon Clifford, Apr 14, 2015, 11:40 pm

IEQ Credits 4.1-4.5- applies to on-site application only?

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Charlie DeTillio on Mar 4, 2015, 8:27 am

We are semi-new to the LEED program and want to be sure that we are following all of the necessary guidelines to achieve the overall credits for the project. This is a LEED Gold project intended...

Last reply: Jon Clifford, Mar 17, 2015, 10:35 pm

Dry-Fog coatings

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Lawrence Lile on Mar 26, 2014, 1:36 pm

I am starting to see a specification for

3. Dry-Fog Coatings:...

Last reply: Kathryn West, Mar 6, 2015, 5:37 pm

Synthetic Enamel's VOC

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Yodi Danusastro on Feb 11, 2015, 4:19 am

Which one from the table that suits for Synthetic Gloss Enamel paint, that use for painting metals?

Last reply: Yodi Danusastro, Feb 11, 2015, 11:28 pm

LEED documents

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Olga Kim on Jan 29, 2015, 4:29 am

Good afternoon all,
I have a question about LEED certification.
We produce high quality water basied paints in Kazakhstan. Our products are certificated by Kazakh Certification Center...

Last reply: John-David Hutchison, LEED AP BD+C, PMP, Feb 11, 2015, 8:32 am

VOC limit for acrylic based industrial enamel paints

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by ABDUL MUTHALIB MOHAMED on Jan 20, 2015, 4:41 am

The project is a 2 storied garment factory located in Bangladesh where they use Industrial Enamel alkyd based paints which has a...

Last reply: Jon Clifford, Jan 20, 2015, 8:45 pm

Polishing Powder

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Omar ElRawy on Jan 13, 2015, 7:27 am

Dear all,
I have a polishing powder that is intended to be used for polishing marble surface. Knowing that this powder is not expected to fill any gaps in the marble surface or...

Last reply: Jon Clifford, Jan 13, 2015, 9:06 pm