Log in
Forum
Loading...
Topic

ANSI/BIFMA e3-2014 or e3-2012 Compliance Documentation

CI-v4 MRc5: Building product disclosure and optimization - material ingredients
posted by Samantha Davidson on Jul 30, 2019, 4:34 pm

I'm looking at the certificate provided by SCS Global that states that the product is "Level 3" and "conforms to ANSI/BIFMA e3-2014e". Unfortunately the certification does not say if 3 points...

Last reply: Samantha Davidson, Jul 30, 2019, 4:35 pm

Points for ACP and as Pilot credit

Pilot-Credits MRpc102: Legal Wood
posted by Keith Robertson on Dec 20, 2016, 12:47 pm

We have registered our Canadian project for the Legal...

Last reply: Marco Valerio Ceccotti, Jul 30, 2019, 10:06 am

Active Monitoring System

Pilot-Credits EQpc124: Performance-based indoor air quality design and assessment
posted by Charlie Popeck on Jul 30, 2019, 4:11 am

Hi, 

The credit language says that "An active monitoring device" must be installed at all times to continuously monitor contaminant levels and appropriate mitigation measures must be...

Carshare vehicles provided by occupant

NC-v4.1 LTc7: Reduced parking footprint
posted by David Lázaro on Jul 30, 2019, 6:58 am

Hi! We are working on a New Construction project, the HQ for a company in a small city. At present, there are no carsharing programs in the city. Since the whole building shall be occupied by the...

Wet Applied Products- Adhesives & Sealants- Drywall Mud

NC-v4 EQc2: Low emitting materials
posted by Kerry Honsinger on Aug 18, 2016, 3:43 pm

I believe drywall joint compounds and drywall finishing products (Mud) are considered Wet Applied Sealants. What Category do they fall under?

Last reply: Craig Graber, Jul 29, 2019, 3:51 pm

EACs and Carbon Offset- Duration of Contract

Retail-CI-v4.1 EAc4: Renewable energy
posted by Michele Bradanini on Jul 29, 2019, 12:21 pm

Hi all LEEDUsers,

For one of our projects, we would like to pursue this v4.1 credit by purchasing Energy Attribute Certificates (EACs) or carbon offsets. In the credit requirements...

Partial Compliance Requirement for Insulation Category

NC-v4.1 EQc2: Low-emitting materials
posted by Marcia Weekes on Apr 9, 2019, 7:15 am

For the insulation category, the credit language indicates that "At least 75% of all insulation, meets the...

Last reply: Renee Shirey, Jul 29, 2019, 11:25 am

Baseline HVAC System for Floors with Conditioned Spaces with no Ventilation

NC-v4 EAp2: Minimum Energy Performance
posted by Pan Pan on Jul 28, 2019, 11:26 pm

Hi!
According to Appendix G if the system selected if Systems 5-10, each floor will be modelled with separate HVAC system. What if the floor contains spaces that are conditioned yet no...

Last reply: Waleed AlGhamdi, Jul 29, 2019, 10:39 am

Government mandated fixtures- exempt?

NC-v4 SSc6: Light Pollution Reduction
posted by Jeff Wiedmeyer on Jul 17, 2019, 4:52 pm

On a project located in New Jersey, US, we have some regional government mandated light poles for street lighting leading into our LPB.  If these street lights are mandated by local government,...

Last reply: Jeff Wiedmeyer, Jul 29, 2019, 9:37 am

Refrigerated areas

NC-v4 EQc5: Thermal comfort
posted by Ricardo Sá on Apr 16, 2019, 4:45 am

Dear All,

we are evaluating the possibility of certifying a distribution center, where 85% of the area is refrigerated for product conservation (between 0 º C and 4 ºC).

In what...

Last reply: Trista Little, Jul 28, 2019, 10:12 pm