Log in
Forum
Topic

LEED AP BD+C on a CI project

CI-v4.1 IN102: LEED Accredited Professional
posted by Joshua Mauldin on Dec 4, 2019, 4:31 pm

with any LEED AP specialty to pursue this credit under the CI rating system.  It was a question I asked in the forum page of the LEED v4 version of this credit, and someone answered it a such.  Log...

Last reply: Mariia Savinska, Nov 14, 2023, 4:12 am

Low emitting material- General Emission Evaluation

NC-v4 EQc2: Low-emitting materials
posted by Antonio Saccardi on Oct 3, 2019, 10:42 am

on following forum (https://leeduser.buildinggreen.com/forum/leed-v41-third-party-certifications), the LEED 3 rd party certification can be used for LEED v4.1. However, so far can be accepted in LEED v4.1 BETA...

Last reply: emily reese moody, Nov 14, 2023, 2:00 am

is drywall not considered a product for LEED V4?

NC-v4 MRc4: Building product disclosure and optimization - material ingredients
posted by Sara BENLOUBA on Feb 16, 2022, 8:59 am

Hello Dears,

Is plasterboard / Drywall not considered a product for LEED V4 ?

This is what I understood from the LEED guide, page 469,

In our project we aim to have 20 Cradle...

Last reply: Mike Refsland, Nov 13, 2023, 3:32 pm

BPDO Credits: Is there a minimum limit on quantity/percentage of products from the same CSI class that I have to implement?

NC-v4.1 MRc2: Environmental Product Declarations
posted by Marcelo Alencar Pereira on Nov 12, 2023, 1:25 pm

Hello LEEDers!

In the Building Product Disclosure and Optimization credits of LEED BD+C (v4 or v4.1), is there a minimum percentage or quantity requirement for each product that must be...

Last reply: Mike Refsland, Nov 13, 2023, 3:19 pm

Recertification of part of building and certifying a part under BD+C

EBOM-v4 MPR2: Must use reasonable LEED boundaries
posted by Azra Semic on Nov 13, 2023, 10:15 am

Hi,
We have a project certified under LEED v4 O+M. We were wondering, if it would be possible, to take a part (20%) of the certified building that can be "separated" (optically and...

% of Male Occupants using restrooms with urinals when project also includes All-gender restrooms

CI-v4 WEc1: Indoor water use reduction
posted by Yarden Harari on Nov 10, 2023, 2:31 pm

Hi - we've received a comment on our water use calculations about changing the % of male occupants using restrooms with urinals because the project also includes several single occupant all-...

Last reply: Yarden Harari, Nov 13, 2023, 10:01 am

Existing building and extension building in one certification

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Helena Garcia on Nov 13, 2023, 5:35 am

In our team we are conducting a study for the construction of an extension of an existing building.
The property applies for LEED certification for both buildings (existing and expansion)....

Last reply: Dave Hubka, Nov 13, 2023, 9:09 am

Declaration of Regional Material

NC-v4 MRc3: Building product disclosure and optimization - sourcing of raw materials
posted by Osman Faroq on Nov 12, 2023, 8:03 am

Dear All, 

I would like to condsider the average recycled contenet for our Reabar of 25%. and also to consider the regional content factors (location factors) for our rebar product. 

...

ROhS Directive

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Gustavo De las Heras Izquierdo on Feb 27, 2014, 8:32 pm

Is the ROhS Directive a valid approach for demonstrating the cable meets the credit requirements?

Please check this out: http://www....

Last reply: Aury Hathout, Nov 11, 2023, 9:01 pm

Equations and calc methods

EBOM-v4.1 EAp3: Energy Performance
posted by Ricardo Filho on Feb 21, 2023, 5:01 am

I am doing some research on LEED v4.1 O+M and I have a number of questions.
I am going to post them here (I know it is a lot) hoping someone knows the answer for a few of them, maybe.

...

Last reply: Saba Hajizadeh, Nov 10, 2023, 4:29 pm