Log in
Forum » NC-2009 IEQc8.1
Loading...
Topic

Supplemental Calculation Spreadsheet

NC-2009 IEQc8.1: Daylight and views - daylight
posted by shane lucero on Mar 23, 2015, 9:11 pm

Hello,

Where would I find the Supplemental Daylight and Views Calculation Spreadsheet for v2009 (LEED Online states it's "found under 'Credit Resources'")?

Thank you.

Last reply: TODD REED, Mar 24, 2015, 9:22 am

Does Revit daylight analysis satisfy CaGBC for IEQc8.1

NC-2009 IEQc8.1: Daylight and views - daylight
posted by ben chouinard on Mar 13, 2015, 6:06 pm

Can anyone confirm if the in-house plugin for Revit 2015 will be accepted for IEQc8.1 simulation?

Last reply: TODD REED, Mar 24, 2015, 8:29 am

Min lux level for Project which has registered 5 months before

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Nikhil Kumar on Jan 9, 2014, 1:03 am

Hi Every one,

Currently we are working for factory building project which has registered five months before under USGBC Rating system LEED 2009. We would like to get Daylighting credit and...

Last reply: Arwid Theuer-Kock, Mar 9, 2015, 10:43 am

Acceptable methods of Glare Control

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Paul Rogers on Mar 2, 2015, 4:50 am

I know that glare control is a requirement for each window. The reference manual gives a list of these to be: fixed exteror shading devices, light shelves, interior blinds and louvres, fritted...

Last reply: TODD REED, Mar 2, 2015, 8:29 am

where to download?

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Weidong Luo on Jan 28, 2015, 8:36 am

When working on leedonline for this credit, we are told to Download, complete and upload the Supplemental Daylight and
Views Calculation Spreadsheet (found under "Credit Resources").
...

Last reply: Caroline O'Leary, Feb 13, 2015, 8:11 pm

Medical Center MRI, CT Scan Rooms

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Sara Zoumbaris on Oct 23, 2014, 9:35 am

Although the October 2013 Matrix, does not allow any patient rooms to be without daylighting/ views, I believe these rooms could be eliminated due to the nature of their process. Has anyone dealt...

Last reply: Neumann Monson, Jan 7, 2015, 5:26 pm

Rolling Shades

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Ema S on Nov 12, 2014, 6:48 pm

Are rolling shades mandatory when doing the prescriptive method?

Last reply: Jill Dalglish, PE, Nov 13, 2014, 9:49 am

Hot desks as regularly occupied space?

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Paul Rogers on Oct 20, 2014, 6:07 am

Should an area designated for hot desking be included as a regularly occupied area? No single user will spend more than one hour per day at these workstations.

Last reply: Jill Dalglish, PE, Oct 20, 2014, 6:35 pm

Conference Rooms with folding partitions

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Christine Spendiff on Sep 8, 2014, 8:19 am

I have a large conference room with a folding partition to create two smaller conference rooms. Do I run the simulation with the partition open (one large room) or closed (two small rooms)?

Last reply: TODD REED, Sep 9, 2014, 1:09 pm

Supplemental Calculator for Residential

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Lauren Fakhoury on May 18, 2011, 3:45 pm

I'm documenting this credit for an apartment building using the v3 supplemental daylight and views calculator. Under "space type" the options are residential: bedroom, residential: dining room,...

Last reply: Crissy Tsai, Sep 8, 2014, 1:48 pm