Log in

Dense cities & Municipality infra structure

NC-v4 SSc4: Rainwater management
posted by soha yamani on Mar 24, 2019, 2:26 am

We have a case were our site lies within a densely urban city , where they have minimal events of rainfall but with huge amounts- therefore allover the city they collect the rain water through...

Last reply: Casey Cullen-Woods, Feb 20, 2020, 6:04 pm

Future Development

NC-v4 LTc4: Surrounding density and diverse uses
posted by Sofia Barahona on Nov 4, 2019, 9:59 am

We are currently working on a project that achieves a combined...

Last reply: Isir Messo, Feb 20, 2020, 9:22 am

CO2 monitors location

NC-2009 IEQc1: Outdoor Air Delivery Monitoring
posted by Isir Messo on Feb 20, 2020, 7:06 am

Hello everybody.

Our client want to install CO2 sensors into the tables (offices), that is below 3 feet above the...

Biophilic Design: Quantifiable Metrics

Pilot-Credits EQpc123: Designing with Nature, Biophilic Design for the Indoor Environment
posted by LEED Team DC on Jan 30, 2019, 10:57 am

Hi, I'm wondering if there are shareable examples of a project team documenting quantifiable biophilic metrics.

I'm inclined to think these metrics could be gained either noting dimensions...

Last reply: Aleksandra Prawda, Feb 20, 2020, 5:19 am

Is it forbidden by the LEED to have à Infrared Taps / sensor taps/automatic Taps

NC-v4 WEp2: Indoor water use reduction
posted by Sara YOUSSOUFI on Feb 20, 2020, 2:50 am


Could you told me if it is forbidden by the LEED standard to put an infrared tap in the toilet?


Lower Flow Restrictor not WS Labelled- Residential Bathroom Faucets

NC-v4 WEp2: Indoor water use reduction
posted by RDK E&S on Nov 4, 2019, 11:00 am

We are got a comment on a residential project where we installed flow restrictors to reduce the faucet flow rate to 0.5 gpm. The 1.5 gpm flow restrictor is WS labelled but the installed 0.5 gpm...

Last reply: Sara YOUSSOUFI, Feb 20, 2020, 2:48 am

Integrated dryer and Water Sense labeled faucet

NC-v4 WEp2: Indoor water use reduction
posted by Elizabeth Floyd on Oct 30, 2019, 12:16 pm

If none of the systems with integrated sink/faucet and hand dryer are available with a Water Sense labeled faucet, does that make the product ineligible for Water Sense labeling? (This is for...

Last reply: Sara YOUSSOUFI, Feb 20, 2020, 2:48 am

Assessment and Planning for Resilience Workbook

posted by Valerie Walsh on Jul 1, 2016, 3:42 pm

Just a heads up to project teams: I was completing the Hazard Assessment inputs for our project using the pc Workbook and noticed that a line item for the Drought category needs to added to the...

Last reply: Mary Ann Lazarus, Feb 19, 2020, 4:57 pm

Representative Measurements

CS-v4 EQc4: Daylight
posted by Summer Minchew on Feb 19, 2020, 4:25 pm

Similar to how we would address views in a core and shell project, can Option 3 measurements be conducted based on a representative floor plan(s) or would measurements need to be conducted for...

90.1 Mandatory Provisions

NC-2009 EAp2: Minimum Energy Performance
posted by Charles Daze on Oct 20, 2015, 12:47 pm

Does Appendix G or LEED modeling protocol require the baseline building be modeled with all of the mandatory provisions of Section 6.4? And if so where is this stated?

Appendix G implies...

Last reply: Gustavo De las Heras Izquierdo, Feb 19, 2020, 3:41 pm