OK, so a reviewer directed me to the 2011 ASHRAE HVAC Applications Handbook. I have the 2015 Handbook, and there in Section 53.7 is an equation which, adjusted for units, has differential Pa at...

If I have an Interior Lighting COMcheck completed for a project, is that sufficient enough for upload or do I still have to provide the Lighting Compliance Documentation Interactive Compliance...

The BD+C Reference manual states: "This credit is not eligible for exemplary performance under the Innovation in Design section." However, a response from Tristan Roberts on June 4, 2010 states...

I had a comment on a LEED review in IEQc7.1 to provide a summary table which lists the heating and cooling design parameters used for each space type and the Room Input Reports for each space...

Hi,
I am modeling campus building under major renovation. But since that building was built in 1968, no envelope data available (no spec. no...

Path 1 indicates flush-out needs to be accomplished with 14,000 cu ft. of OA per sq. ft. of floor area while maintaining an internal temperature of at least 60 deg F and no more than 60% RH....

I have found that it takes a bit of work to actually see that a facility has achieved the Recycling Certification Institute's CORR certification. If you go to the RCI site (...

Hi,

We have a campus master site occupying a city block. There are 7 podium floors with a hotel, condo towers and retail sprouting from them that are parsed into 3 separate LEED projects...

Does a project still qualify for credit if the site is within a DDA boundary that is set to change in the upcoming months?

We submitted for this credit using the results from the REVIT 2016 daylight analysis tool. Both the Lighting Analysis plans and the Room Schedule Threshold results were submitted as part of the...