Log in
Forum » NC-2009 IEQc8.1
Loading...
Topic

Open Floor Plan with different Tvis Values

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Marisa Britton on Apr 16, 2015, 1:31 pm

Can I do prescriptive method of calculation for an open floor plan if the N+W glazing walls of the building have a...

Last reply: Marisa Britton, Apr 16, 2015, 2:24 pm

Option 3

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Mike D on Apr 13, 2015, 9:36 am

For option 3, do measurements have to be taken more than once?

Last reply: TODD REED, Apr 13, 2015, 11:02 am

Option 3 daylight measurement

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Stella Stella on Sep 1, 2014, 4:48 am

Hi,
We are proposing to carry out the Option-3 daylight measurement in our project to demonstrate compliance. I would like to know if the measurements could be taken before the furniture...

Last reply: Mike D, Apr 13, 2015, 9:27 am

Regularly Occupied or Not?

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Cynthia Estrada on Apr 2, 2015, 4:28 pm

Hello-
I don't know if anyone has asked this question or not, it is a rather unique situation. Our project is a technical college and this particular building's academic programs revolve...

Last reply: TODD REED, Apr 3, 2015, 8:21 am

Areas passing at one time but not another

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Lisa Fabula on Mar 26, 2015, 7:01 pm

If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time. Basically what I am getting at is that if at 9am 80 percent of the...

Last reply: Lisa Fabula, Mar 27, 2015, 12:06 pm

Hello, I am documenting this

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Michael Russo on Jan 7, 2015, 6:47 pm

Hello,

I am documenting this credit using the simulation method. For many of the regularly occupied spaces, the rooms are above the 10fc requirement except for a small corner of the room...

Last reply: Lisa Fabula, Mar 26, 2015, 7:00 pm

Supplemental Calculation Spreadsheet

NC-2009 IEQc8.1: Daylight and views - daylight
posted by shane lucero on Mar 23, 2015, 9:11 pm

Hello,

Where would I find the Supplemental Daylight and Views Calculation Spreadsheet for v2009 (LEED Online states it's "found under 'Credit Resources'")?

Thank you.

Last reply: TODD REED, Mar 24, 2015, 9:22 am

Does Revit daylight analysis satisfy CaGBC for IEQc8.1

NC-2009 IEQc8.1: Daylight and views - daylight
posted by ben chouinard on Mar 13, 2015, 6:06 pm

Can anyone confirm if the in-house plugin for Revit 2015 will be accepted for IEQc8.1 simulation?

Last reply: TODD REED, Mar 24, 2015, 8:29 am

Min lux level for Project which has registered 5 months before

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Nikhil Kumar on Jan 9, 2014, 1:03 am

Hi Every one,

Currently we are working for factory building project which has registered five months before under USGBC Rating system LEED 2009. We would like to get Daylighting credit and...

Last reply: Arwid Theuer-Kock, Mar 9, 2015, 10:43 am

Acceptable methods of Glare Control

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Paul Rogers on Mar 2, 2015, 4:50 am

I know that glare control is a requirement for each window. The reference manual gives a list of these to be: fixed exteror shading devices, light shelves, interior blinds and louvres, fritted...

Last reply: TODD REED, Mar 2, 2015, 8:29 am