Log in
Forum » NC-v4 EQc2
Topic

Furniture Fabric

NC-v4 EQc2: Low emitting materials
posted by Adam Yarnell on Oct 10, 2019, 11:57 am

Hi all,

I'm wondering if anyone has gotten push-back on or been asked for clarification for fabrics when pursuing the furniture category. Basically, will an acceptable third-party...

Furniture BIFMA levels

NC-v4 EQc2: Low emitting materials
posted by Sue Bryant on Apr 9, 2018, 12:39 pm

Do Bifma levels 1, 2, & 3 correlate to ANSI M7.1 2011 Sections 7.6.1, 7.6.2 and 7.6.3? If furniture is GREEN Guard Gold does it comply with 7.6.2 for full credit? I am trying to provide an...

Last reply: Walter Broner, Oct 10, 2019, 11:42 am

Wet Applied Products Meeting Option 1- Volume Requirement?

NC-v4 EQc2: Low emitting materials
posted by Summer Gorder on Jul 10, 2019, 1:13 pm

For Wet Applied Products that meet IEQ credit 2, option 1: do you still need to provide the volume of the product used on the project, or is that just for option 2, Budget Calculation? Thanks!...

Last reply: Sue Bryant, Oct 3, 2019, 4:47 pm

Operable Partitions

NC-v4 EQc2: Low emitting materials
posted by Jeff Ross-Bain, PE, LEED Fellow on Sep 30, 2019, 10:14 am

We have a project that is struggling to find LEEDv4 compliant operable partitions. Could anyone recommend a manufacturer that has CDPHv1.1-2010 general emissions testing (i.e., GREENGUARD Gold,...

Self Certification for Emissions

NC-v4 EQc2: Low emitting materials
posted by Michelle Rosenberger on Sep 24, 2019, 2:05 pm

I have a letter from a major manufacturer who is indicating that they have performed an emissions test on one of a line of similar chemical products. That they have determined that the product...

Last reply: David Posada, Sep 24, 2019, 3:11 pm

Concrete bonding agent below slab on grade

NC-v4 EQc2: Low emitting materials
posted by Vandita Mudgal on Sep 10, 2019, 4:35 pm

We have to use a strong concrete bonding agent below a 2 to 3" Slab on grade to stick with the concrete foundation below the...

Last reply: Vandita Mudgal, Sep 11, 2019, 1:21 pm

Sealant Tape Adhesive Volume?

NC-v4 EQc2: Low emitting materials
posted by RDK E&S on Aug 16, 2018, 9:54 pm

Forgive my ignorance here, but how does LEED v4 handle sealant tapes? In this case I'm asking about duct sealant tapes, but it could apply to any other tape used in construction. It seems clear...

Last reply: Elizabeth Kertesz, Aug 29, 2019, 5:41 pm

European testing methods for US projects

NC-v4 EQc2: Low emitting materials
posted by Kavita K on Aug 21, 2019, 1:11 pm

Can US projects use products which show compliance with VOC emissions requirement through AgBB (European) testing? Or does it need to be CDPH only. 

Last reply: Reinhard Oppl, Aug 27, 2019, 5:45 am

NAF Composites Not CARB

NC-v4 EQc2: Low emitting materials
posted by Michelle Rosenberger on Aug 16, 2019, 12:54 pm

There are particleboard products that are NAF with third party certifications that LEED reviewers will not accept because they do not have a CARB exempt executive order. I have asked reviewers to...

Last reply: Michelle Rosenberger, Aug 16, 2019, 2:01 pm

Wall Components

NC-v4 EQc2: Low emitting materials
posted by LUCY WILLIAMS on Jun 15, 2017, 10:15 am

When reporting for the wall, ceiling category under Option 1, do all of the interior partition components need to be complaint- the gypsum board, the tape, the joint compound, the studs and the...

Last reply: Kavita K, Aug 13, 2019, 4:44 pm