Log in
Forum » Germany
Topic

Detaining the rainwater runoff-an accepted solution?

NC-v4 SSc4: Rainwater management
posted by Florian Schmidtchen on Dec 8, 2016, 6:13 am

Dear all,
In our project we are planning to follow option 1 path 2. Therefor we provide underground-trench systems and a technical ditch on our project site, which gets inserted creatively...

Last reply: Nash Emrich, Jan 15, 2019, 10:07 am

final fit-out on tenants request-> designing provisions for negative pressure difficult

NC-v4 EQc1: Enhanced indoor air quality strategies
posted by Mark Kumar Bose on Jun 3, 2018, 6:12 pm

Hi,

how do deal with the fact that often the final office floor plans will be fixed later on tenant request so that the technical provisions (negative pressure, etc.) for copy rooms can...

Last reply: Mark Kumar Bose, Jan 14, 2019, 2:56 pm

Is it possible to earn the credit with a parking garage in the underground floors?

NC-v4 LTc7: Reduced parking footprint
posted by Benjamin Weise on Nov 29, 2018, 3:12 am

Hello! I am new to the topic and wondering if the project I am working on can achieve this credit. The project (new construction office building) is located in Berlin and does only provide garage...

Last reply: Emily Purcell, Dec 6, 2018, 9:29 am

Not complying with Smoking ban

NC-2009 IEQp2: Environmental Tobacco Smoke (ETS) Control
posted by Wioletta Simlat on Nov 26, 2018, 9:09 am

Hi all,

I have a question that consider already certified buildings that do not comply with the ETS credit. As it is one of the K/O credits, if a building do not comply with it, is it...

Last reply: Dustin Norton, Nov 26, 2018, 10:37 am

risk to damage the existing waste water pipes because of the low-flow faucet

NC-v4 WEp2: Indoor water use reduction
posted by Qian Tang on Nov 19, 2018, 7:37 am

Dear LEED-experten,

has anyone experience about the low-flow lavatory faucet on the restroom washbasin in Europe? Actually the LEED-baseline has a much lower value (2 l/min) than...

Last reply: Tristan Roberts, Nov 19, 2018, 5:02 pm

Alternative Compliance Path to achieve Acoustic Credit

NC-v4 EQc9: Acoustic performance
posted by Wioletta Simlat on Mar 4, 2015, 5:24 am

Do you know if there is alternative path to achieve EQ Credit 9 outside the US? I'm working with a Project in Germany and we have a probem with Sound Transmission. German Standards does not use...

Last reply: Lise Dannesboe, Nov 13, 2018, 6:10 am

Is a plasterboard a inherently nonemitting source?

NC-v4 EQc2: Low emitting materials
posted by J Schuetz on Oct 29, 2018, 9:46 am

Dear all,

does a plasterboard panel count as a inherently nonemitting source, even so it is wraped in paper?

Best regards and thank you

Last reply: Paula Melton, Nov 5, 2018, 12:27 pm

Data Centers

LEED Rating System Selection
posted by Abdul Hadi on Oct 23, 2018, 9:48 am

Greetings,
I am a student of International Project Management and for my thesis research, I seek the LEED criteria for the Construction of Data Centers. 
I have not been able to find...

Last reply: Abdul Hadi, Oct 23, 2018, 10:33 am

How to simplify a complex building in a simulation model

NC-v4 EAp2: Minimum Energy Performance
posted by Hagen Bork on Sep 21, 2018, 6:14 am

Hi there,

I've got a 24 floor office building to model. The floors have 4 different envelope designs and on each level of the building there are at least 7 different zones (after combining...

Last reply: Marcus Sheffer, Sep 24, 2018, 10:47 am

LIght Pollution Reduction only applicable to exterior lighting?

NC-v4 SSc6: Light Pollution Reduction
posted by Benjamin Weise on Sep 19, 2018, 5:39 am

Bill Swanson Sr. Electrical Engineer Feyen Zylstra LEEDuser Expert 687 thumbs up September 19, 2018- 9:33 am You only need to ask the question once. Log in or register to post comments Benjamin Weise CSD Engineers LEEDuser Premium Member 4 thumbs up September 19, 2018- 9:40 am there seems to have been a problem with my post. I didnt receive a confirmation and couldnt find it in the forum. That's why I posted twice. Sorry! Log in or register to post comments ...

Last reply: Benjamin Weise, Sep 19, 2018, 9:40 am