Log in
Forum
Topic

Shop Applied vs. Site Applied Wood Coatings

NC-v4.1 EQc2: Low-emitting materials
posted by Waleed AlGhamdi on Jul 9, 2020, 9:23 pm

We have a project with a lot of...

The project is the central energy plant

NC-v4.1 WEc3: Optimize Process Water Use
posted by Stephanie Graham on Jul 17, 2020, 11:16 am

Our project is a LEED v4/v4.1BD+C new central cooling plant which uses geothermal for cooling on a university campus.  Besides the plant, the building has office areas for the operators of the...

Infrastructure vs EVSE Install, can we get points for both for a total of 2 points?

NC-v4.1 LTc8: Electric Vehicles
posted by Derick Farfan on Jul 29, 2020, 8:38 am

Still learning...the way the credit is written it makes it appear that it is you go EITHER go for the Infrastructure Credit (6% or 6 spaces, whichever is greater) OR EVSE Install (2% or 2,...

On site VOC measurements

NC-v4.1 EQc1: Enhanced indoor air quality strategies
posted by Przemysław Rejczak on Aug 26, 2020, 6:23 am

Dear Everyone,

I`ve a question regarding to...

Testing methods accepted for formaldehyde emissions evaluation outside United States

NC-v4.1 EQc2: Low-emitting materials
posted by Miguel Broncano on Aug 26, 2020, 7:24 am

Dear all,

Regarding compliance of Blue Angel certificate with general emissions evaluation, it is neccesary to fulfill an adittional requirement: "The formaldehyde limit of 10 μg/m3 at 28...

V4.1 Acoustic Performance Calculator Password

NC-v4.1 EQc9: Acoustic performance
posted by John Page on Sep 2, 2020, 3:53 pm

I filled out these Excel Workbook forms several months ago and now I cannot get access because it asks for a Password that I do not have. How can this be bypassed or a Password provided? I have...

Leed and well

NC-v4.1 EQc9: Acoustic performance
posted by miles woolley on Sep 17, 2020, 3:27 pm

We have an office project that looks at achieving both Leed and Well guidance for acoustics. Does anyone have similar experience? And if so which was the overriding criteria?

Dwelling units monitoring

NC-v4.1 EQp1: Minimum indoor air quality performance
posted by Nicolas Martinez Ochoa on Sep 24, 2020, 10:20 am

Hello everyone,

I’m working in a multifamily project which uses natural ventilation for both conditioning and ventilation. My question is regarding indoor air quality monitoring. The...

VOC content evaluation- category definitions and limits vary across the regulations listed

NC-v4.1 EQc2: Low-emitting materials
posted by Sagar Raghuwanshi on Sep 28, 2020, 10:21 am

LEED v4.1 says that "Product meets the...

Daylight Simulation Calculations

NC-v4.1 EQc7: Daylight
posted by Jamie Dubbe on Nov 17, 2020, 10:10 am

After some research it appears there are a couple of ways to produce the simulation calculations - Insight, LightStanza - however neigther of these are rated as acceptable for use on Department...