Hi, I am currently working in the certification of an industrial building. The industrial processes are consuming a high percentage of the building's energy consumption. Does the 10% minimum...

Hi All,
I'm working on a project building with double skin facade, and this double skin facade system is equipped with an automatic shading device in the cavity space between the glazings...

Dear All,
I'm working on a residential apartments project and I'm trying to figure out what ASHRAE 90.1-2007 mandates as maximum lighting power...

We are struggling with some definitions from Table 9.4.5 of 90.1-2007. If our building has exterior landscaping, is that covered by any of the area types under Tradable Surfaces (for example...

I am working on a manufacturing facility addition where the owner wants to pursue LEED certification. The LEED energy model turned out that we are not going to meet the 10% minimum. The owner...

We have a 3,000 SF building which will be occupied intermittently by the client/owner.

One small part of the building is being continuously maintained at occupied temperatures, a second...

In ASHRAE90.1-2007, the construction type and U value of Baseline Model is regulated. We use EnergyPlus to do energy modeling, so there is a problem, where can we find standard construction...

Hi, I have a question regarding case 2. Residential and Hospital Projects Only.

In the requirement for the prerequiset 8 bullets are listed that needs to be met. The four first ones are...

We are trying to classify a winery. One of the areas is used for barrel fermentation, and is temperature controlled anywhere from 55-75 degrees based on the fermentation process. Would this...

My project building is one of 40+ on a company's campus/site. They do not purchase electricity on a building-by-building basis, but for the entire site. My project building is metered and the...