| Topic | Recent |
|---|---|
Denied CreditsNC-2009 EAp2: Minimum Energy Performanceposted by Maya Karkour on Sep 20, 2011, 5:19 am
Dear all, We received the Design Final Review for our project, and a total of 7 credits were denied. 1) If we have initially provided documentation which has not been interpreted... Last reply: Susann Geithner, Sep 20, 2011, 10:12 am |
|
Fire CaulkNC-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Lu Anne Nielsen on Aug 9, 2011, 3:58 pm
Does fire caulk fall under "other... Last reply: Mara Baum, Sep 19, 2011, 6:54 pm |
|
It doesn't seem like thisNC-2009 EAc5: Measurement and Verificationposted by Maura Adams on Aug 16, 2011, 10:33 am
It doesn't seem like this credit should be so complicated. We have a full DDC system in the new building, which is part of a campus. We already have a Honeywell team on site to monitor other... Last reply: Marcus Sheffer, Sep 19, 2011, 6:15 pm |
|
Highrise condo- What to monitor and meterNC-2009 EAc5: Measurement and Verificationposted by Rob Hink on Sep 8, 2011, 7:57 pm
With a 54 unit highrise condo, what would be acceptable to meter to meet the requirements of the credit. Individual unit electric meters? I can't imagine putting CTs on 130 individual heat pump... Last reply: Marcus Sheffer, Sep 19, 2011, 6:12 pm |
|
PVs added after design submissionNC-2009 EAc2: On-Site Renewable Energyposted by Aliesa Adelman on Aug 25, 2011, 3:02 pm
If an energy model has been reviewed during design phase submission and PVs are added during construction but were not included in the model, can the model be rerun and resubmitted during the... Last reply: Marcus Sheffer, Sep 19, 2011, 5:02 pm |
|
Unusual Building ConstructionNC-2009 EAc1: Optimize Energy Performanceposted by Tom Nichols on Jun 28, 2011, 6:44 am
We are working on an eQuest model of a very unusual building. It was constructed in 1911. The original building had a lower level, first and second floor in the main wing and four stories of... Last reply: Marcus Sheffer, Sep 19, 2011, 4:56 pm |
|
LEED 2009 for New Construct, Optimize Energy Perform- EA CR 1NC-2009 EAc1: Optimize Energy Performanceposted by John Harrington on Jul 29, 2011, 11:30 am
I have two buidings on the same site/project boundry. Do I model the two buildings as one building? If I did two seperate models I am not sure how I would show this on the LEED Credit... Last reply: Marcus Sheffer, Sep 19, 2011, 4:40 pm |
|
Landscape lightingNC-2009 EAc1: Optimize Energy Performanceposted by Julien Daclin on Sep 13, 2011, 1:46 pm
Appendix G (Table 3.1) states that lighting power for building facades has to be modeled in the energy simulation. However, it is not clear if landscape lighting should also be taken into account... Last reply: Marcus Sheffer, Sep 19, 2011, 4:39 pm |
|
Trace 700 "LEED Energy Performance Summary Report"NC-2009 EAp2: Minimum Energy Performanceposted by Erin Adkins on Sep 19, 2011, 3:49 pm
For those of you that use Trace 700 and are familiar with the fairly new feature, the "LEED Energy Performance Summary Report", that Provides all the information for each section of the EAp2... Last reply: Marcus Sheffer, Sep 19, 2011, 4:13 pm |
|
Water heatersNC-2009 EAp2: Minimum Energy Performanceposted by Paula Hernandez on Sep 16, 2011, 1:41 pm
I have to model a building which is using solar pannels electric heaters. But they also have an electric resistance as back up for those moments when solar heat is not enough. Last reply: Marcus Sheffer, Sep 19, 2011, 1:38 pm |
