Seems that some of my questions are not easy to answer.
Here is another question for the same lab project.

Fan system Power limitations are calculated according to Table 6.5.3.1.1A...

For this particular credit there is an exemption on how to determine site boundary for zero lot line buildings, that you can use a curb line along the walls instead of normal site boundary as for...

Dear All, My question refers to the LEED Core and Shell modelling guidelines in Appendix 2 of the LEED BD&C guide.

Under the subheading 'tenant spaces' it states that ...'... if the...

In our project, we are relocating a lot of IT equipment from another office, some of which is a few years old. From previous comments I'm not sure if I need to include these in the calculation...

Hi! I'm working on a project that includes a large number of "pedestrian streets" and I can't seem to categorize them in a consistent way with respect to the various LEED ND prerequisites and...

Got this update forwarded from a USGBC rep:
"The updated guidance including group certification (what was Part 2) will be out at the end of October. However, we won't be able to certify...

Dear All,

In the LEED MPR, it states that carpark areas cannot be part of the calculated GFA of a project submitting for LEED. I have submitting a building with a very large multilevel...

Dear all,

I am modeling a C&S project (large shopping mall).

For the process loads, I am using:
- For the Core Areas: ASHRAE 90.1 User's Manual - Page G32 - Table G-B...

This is the updated portion of IEQ c5.

In mechanically ventilated buildings, each ventilations systems that supplies outdoor air shall comply with the following:
o Particle filters...

Hi All,

Assuming that one of the hazardous chemical area also has a fresh air supply (in addition to the exhaust), how do we determine if the min exhaust rate (0.5cfm/sq.ft) is achieved...