| Topic | Recent |
|---|---|
One Conductivity Meter for Multiple towersEBOM-2009 WEc4: Cooling Tower Water Managementposted by Jessica Hawley on Sep 30, 2011, 2:07 pm
On our project building there is only one system meter. All cooling towers are interconnected with a single header which is monitored by the... Last reply: Brittany Bliffen, Oct 21, 2011, 5:48 pm |
|
Pursuing this Credit for New ConstructionEBOM-2009 WEc4: Cooling Tower Water Managementposted by Michael Angell on Oct 17, 2011, 2:06 pm
Would this credit be available as an ID credit under a project going for new construction? Or is there already a like credit that addresses these parameters? Last reply: Brittany Bliffen, Oct 21, 2011, 5:36 pm |
|
equipment rooms and data centersEBOM-2009 IEQc1.4: Indoor air quality best management practices - reduce particulates in air distributionposted by Wendy Gibson on May 17, 2010, 5:58 pm
LEED states that it requires... Last reply: Robert Neil, Oct 21, 2011, 4:27 pm |
|
phased flushing for hospital projectCI-2009 IEQc3.2: Construction IAQ management plan - before occupancyposted by Ed Clark on Oct 21, 2011, 11:34 am
Due to phasing plan the contractor will need to run... Last reply: Susan Walter, Oct 21, 2011, 1:29 pm |
|
No smoking rooms in tenant spaceCI-2009 IEQp2: Environmental Tobacco Smoke (ETS) Controlposted by Adam Targowski on Oct 20, 2011, 10:39 am
There is a building where somking is allowed and there are some rooms designated for somoking but they are all outside the tenant space so they are not in the project scope of work. In that case... Last reply: Adam Targowski, Oct 21, 2011, 5:56 am |
|
Performance Option and 10% Power Density ReductionCI-2009 EAp2: Minimum Energy Performanceposted by Luis Miguel Diazgranados on Oct 19, 2011, 5:10 pm
Hi everyone I'm kind of confused because the explanation on the Bird's Eye View differs from the Credit Language's one. The Bird's Eye View includes the 10% Power Density Reduction and 50... Last reply: Luis Miguel Diazgranados, Oct 20, 2011, 12:25 pm |
|
Free valet parking for LE/FEVs- Does this count?NC-2009 SSc4.3: Alternative transportation - low-emitting and fuel-efficient vehiclesposted by Tricia Loe on Oct 18, 2011, 4:19 pm
My question is similar to the most recent question. We are working on a hotel project with valet parking. The owners said that they would offer free valet parking for low-emitting and fuel-... Last reply: Susan Walter, Oct 20, 2011, 11:52 am |
|
Enhanced Commissioning Action StepsCI-2009 EAc2: Enhanced Commissioningposted by Garrett Billings on Oct 12, 2011, 7:53 pmbut that there was still value in the process above just points. We will let this forum know as they get submitted. Log in or register to post comments Emily Catacchio Sustainability Specialist Wight and Company LEEDuser... Last reply: Susan Walter, Oct 20, 2011, 11:47 am |
|
Anyone used 3ds max for Option 1?NC-2009 IEQc8.1: Daylight and views - daylightposted by Erica Downs on Feb 23, 2011, 5:37 pm
Has anyone had success using 3ds max for the Option 1 simulation? Thanks. Last reply: Daniel R Gutierrez, Oct 20, 2011, 10:07 am |
|
GYM FLOOR PAINTSSchools-2009 IEQc4.2: Low-Emitting Materials—Paints and Coatingsposted by Christian Nielsen-Palacios on Jun 10, 2010, 11:36 am
The color paints usually submitted for use on a gym floor seem to have very high... Last reply: Josh Jacobs, Oct 20, 2011, 7:39 am |
