Log in
Forum
Topic

Process Costs Tables for C&S

CS-2009 EAp2: Minimum Energy Performance
posted by Maya Karkour on Oct 19, 2011, 9:12 am

Dear all,

I am modeling a C&S project (large shopping mall).

For the process loads, I am using:
- For the Core Areas: ASHRAE 90.1 User's Manual - Page G32 - Table G-B...

Last reply: Marcus Sheffer, Oct 19, 2011, 10:03 am

an update from February 2011

CI-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Seonhee Kim on Apr 6, 2011, 3:03 pm

This is the updated portion of IEQ c5.

In mechanically ventilated buildings, each ventilations systems that supplies outdoor air shall comply with the following:
o Particle filters...

Last reply: Dylan Connelly, Oct 18, 2011, 6:38 pm

Exhaust Rate of at least 0.5cfm/sq.ft

NC-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Maya Karkour on Aug 1, 2011, 9:03 am

Hi All,

Assuming that one of the hazardous chemical area also has a fresh air supply (in addition to the exhaust), how do we determine if the min exhaust rate (0.5cfm/sq.ft) is achieved...

Last reply: Dylan Connelly, Oct 18, 2011, 6:29 pm

Pilot Credit #45 is a very indepth site analysis

Pilot-Credits SSpc45: Site assessment
posted by Kendal Neitzke on Oct 18, 2011, 3:19 pm

Our project site has a development history going back to the mid-1800's which included a rather lengthy and involved brownfield remediation. Although the documentation for this credit required a...

System status report for ventilation system

EBOM-2009 IEQp1: Minimum indoor air quality performance
posted by Sundararaj Subburaman on Mar 31, 2011, 7:44 am

We are pursuing LEED-EB:O&M for an office building. It has BAS functions for heating, ventilating, and air conditioning system.

To comply with the prerequisite requirements, we...

Last reply: Alexa Stone, Oct 18, 2011, 1:54 pm

Definition of "Outdoor Air"

NC-2009 IEQp1: Minimum indoor air quality performance
posted by James Chueh on Sep 27, 2011, 11:08 pm

We are seeking LEED NC certification in a high-tech manufacturing plant, and it is a normally practice to only use natural ventilation (louvers and openings to outside of the building) for spaces...

Last reply: Roger Chang, Oct 18, 2011, 1:37 pm

Are Form submetering requirements greater than Ref Guide?

CI-2009 EAc3: Measurement and Verification
posted by Raphael Sperry on Sep 28, 2011, 4:19 pm

In Case 1 (project

Last reply: Ante Vulin, Oct 18, 2011, 11:44 am

Field Personnel

General forums
posted by Emily Catacchio on Oct 17, 2011, 6:09 pm

In my opinion, yes. Though I have not used it specifically in the field.

SSc6.1 Pond with Flow Restrictor and Total Stormwater Volume

NC-2009 SSc6.1: Stormwater design - quantity control
posted by Sandra Bauder on Oct 13, 2011, 9:32 am

I am having the same issue as Lucy (October 18, 2010) on one of our current projects, and the comments by Gregory and Jennifer were helpful but I still have some questions.
Scenario:...

Last reply: Sandra Bauder, Oct 17, 2011, 3:16 pm

Can A Dormitory Count for the 10 Units per Acre Requirement?

NC-2009 SSc2: Development Density and Community Connectivity
posted by Landon Chapman on Oct 14, 2011, 4:42 pm

I've got all options satisfied for Option 2 but I'm having trouble with the 10 units per acre requirement. There is an existing dormitory within the 1/2 mile radius (and, in fact, my project is...

Last reply: Patrice Coffman, Oct 17, 2011, 1:34 pm