Log in
Forum
Topic

phased flushing for hospital project

CI-2009 IEQc3.2: Construction IAQ management plan - before occupancy
posted by Ed Clark on Oct 21, 2011, 11:34 am

Due to phasing plan the contractor will need to run...

Last reply: Susan Walter, Oct 21, 2011, 1:29 pm

No smoking rooms in tenant space

CI-2009 IEQp2: Environmental Tobacco Smoke (ETS) Control
posted by Adam Targowski on Oct 20, 2011, 10:39 am

There is a building where somking is allowed and there are some rooms designated for somoking but they are all outside the tenant space so they are not in the project scope of work. In that case...

Last reply: Adam Targowski, Oct 21, 2011, 5:56 am

Performance Option and 10% Power Density Reduction

CI-2009 EAp2: Minimum Energy Performance
posted by Luis Miguel Diazgranados on Oct 19, 2011, 5:10 pm

Hi everyone

I'm kind of confused because the explanation on the Bird's Eye View differs from the Credit Language's one. The Bird's Eye View includes the 10% Power Density Reduction and 50...

Last reply: Luis Miguel Diazgranados, Oct 20, 2011, 12:25 pm

Free valet parking for LE/FEVs- Does this count?

NC-2009 SSc4.3: Alternative transportation - low-emitting and fuel-efficient vehicles
posted by Tricia Loe on Oct 18, 2011, 4:19 pm

My question is similar to the most recent question. We are working on a hotel project with valet parking. The owners said that they would offer free valet parking for low-emitting and fuel-...

Last reply: Susan Walter, Oct 20, 2011, 11:52 am

Enhanced Commissioning Action Steps

CI-2009 EAc2: Enhanced Commissioning
posted by Garrett Billings on Oct 12, 2011, 7:53 pm

but that there was still value in the process above just points. We will let this forum know as they get submitted. Log in or register to post comments Emily Catacchio Sustainability Specialist Wight and Company LEEDuser...

Last reply: Susan Walter, Oct 20, 2011, 11:47 am

Anyone used 3ds max for Option 1?

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Erica Downs on Feb 23, 2011, 5:37 pm

Has anyone had success using 3ds max for the Option 1 simulation? Thanks.

Last reply: Daniel R Gutierrez, Oct 20, 2011, 10:07 am

GYM FLOOR PAINTS

Schools-2009 IEQc4.2: Low-Emitting Materials—Paints and Coatings
posted by Christian Nielsen-Palacios on Jun 10, 2010, 11:36 am

The color paints usually submitted for use on a gym floor seem to have very high...

Last reply: Josh Jacobs, Oct 20, 2011, 7:39 am

Project found old diesel tank

NC-2009 SSc3: Brownfield Redevelopment
posted by Tanja Arnesson on Oct 20, 2011, 3:57 am

Hi,

At the commencement of excavation work the project discovered an old diesel tank that had leaked. This meant that some of the soil was contaminated with diesel. The project took its...

Last reply: Larry Sims, Oct 20, 2011, 7:36 am

Turns off the light during the night

NC-2009 SSc8: Light Pollution Reduction
posted by Tanja Arnesson on Oct 20, 2011, 2:52 am

Hi,

I'm working on a project in Sweden where we talked about turing off the exterior light between 6pm and 6am. Will this help us meet the requirements or do we need to do all the...

Is Tenant commercial refrigeration units included?

NC-2009 EAc4: Enhanced Refrigerant Management
posted by Timo Rintala on Oct 18, 2011, 9:18 am

I'm currently working on a LEED NC project on a central university library projects. While the HVAC centralized cooling unist comply with the requirement, a question has arisen about tenant...

Last reply: Emily Catacchio, Oct 19, 2011, 9:05 pm