Log in
Forum
Topic

cutsheets?

CS-2009 MRc6: Certified Wood
posted by Sara Neff on Jun 3, 2011, 7:33 pm

I'm confused on whether or not we need to provide product cutsheets, or if the invoices (line item, with dollar values and the...

Last reply: Tristan Roberts, Nov 21, 2011, 1:15 am

HVAC System

CS-2009 EAc4: Enhanced Refrigerant Management
posted by Yolanda Sanchez on Jul 11, 2011, 1:41 pm

HVAC for the whole building is in the process of being designed (VRF system). We would like to know if the system can be installed in 2 stages, but we would like to submit the LEED certification...

Last reply: Tristan Roberts, Nov 21, 2011, 1:12 am

Developer Owned On-Site Renewable Energy Sold to Tenants

CS-2009 EAc2: On-Site Renewable Energy
posted by Mark Frey on Jun 1, 2011, 11:14 am

We are working on a LEED CS project where the investor will sell the energy produced on-site by photovoltaic systems to the tenants in the project building, according to internal fees at a...

Last reply: Tristan Roberts, Nov 21, 2011, 1:10 am

vestibule instead of pressure difference

CS-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Nándor Kovács on Aug 1, 2011, 4:30 am

I found in ASHRAE 62.1-2004 standard that using a vestibule to provide airlock between garage and regulary occupied spaces is a compilant way to limit the entry of exhaust gases.

Is it...

Last reply: Tristan Roberts, Nov 21, 2011, 1:05 am

Residential HVAC included in commissioning scope of LEED CS?

CS-2009 EAp1: Fundamental Commissioning of Building Energy Systems
posted by Jorng-ren Chern on Oct 25, 2011, 6:22 am

I am working on a condominium project which is planning to certify LEED CS.
The residential units will be sold to buyers when the construction is complete.

The project owner will...

Last reply: Tristan Roberts, Nov 21, 2011, 12:22 am

Rainwater for irrigation

CS-2009 WEc2: Innovative Wastewater Technologies
posted by Juan Robles on Jul 14, 2011, 6:17 pm

We are collecting rainwater and using it for maintenance in the common areas. At the same time, we are achieving a 62% potable water use reduction installing low flush fixtures. Does the...

Last reply: Tristan Roberts, Nov 21, 2011, 12:20 am

IEQc7.1

NC-2009 IEQc7.1: Thermal comfort - design
posted by Robert Shapero on May 27, 2011, 2:14 pm

Tristan,

Is it possible to show a sample calc for credit 7.1. I am not sure how to calculate this and would welcome any insights as to how about providing this calculation. I was hoping to...

Last reply: Tristan Roberts, Nov 20, 2011, 11:52 pm

viscose

CI-2009 MRc6: Rapidly Renewable Materials
posted by Giselle Walsh on Oct 11, 2011, 2:18 pm

If a product has cotton and viscose blend, can I the entire product be considered rapidly renewable or just the cotton portion?

Last reply: Tristan Roberts, Nov 20, 2011, 11:37 pm

Calculations

CI-2009 MRp1: Storage and Collection of Recyclables
posted by Sheela I on Nov 17, 2011, 11:12 am

California has sizing guidelines for recycling areas. Do we need to use this % vs SF for any other state? Our project is in PA. Can you someone please let me know if we have follow these...

Last reply: Tristan Roberts, Nov 20, 2011, 11:36 pm

LEED CI- S.S. credit 3.3- Case 1- Option 2

CI-2009 SSc3.3: Alternative transportation - parking availability
posted by Sheela I on Aug 31, 2011, 4:17 pm

Our project area is less than 75% of the total building area - as we are one of the tenants in 25 floor building. So i guess the project would qualify under Case1 - Option 2. Can you someone...

Last reply: Tristan Roberts, Nov 20, 2011, 11:35 pm