Log in
Forum
Topic

Radiant Temperature Measurement

EBOM-2009 IEQc2.3: Occupant comfort - thermal comfort monitoring
posted by Sonrisa Lucero on Oct 10, 2011, 5:04 pm

In the picture on the "Bird's Eye View" page, there is a picture of an infrared thermometer. This would take the temperature of an object. However, in order to comply with this credit, it is my...

Last reply: Jeremy Poling, Nov 28, 2011, 1:44 pm

Process for corrective action

CS-2009 EAc5.2: Measurement and verification - tenant submetering
posted by Maya Karkour on Apr 27, 2011, 3:50 am

Hello,

One of the requirements of EA Credit 5.2 is to "provide a process for corrective action if the results of the M&V plan indicate that energy savings are not being achieved"....

Last reply: Gordon Shymko, Nov 28, 2011, 1:24 pm

Gross ARI rated cooling capacity

NC-2009 EAc4: Enhanced Refrigerant Management
posted by Devani PERERA on Apr 27, 2011, 7:12 am

Hi,
Where should I get the "gross ARI rated cooling capacity" for air to water heat pumps ? This is not covered by ARI 550/590 which usually applies to chillers. On the technical data...

Last reply: Christopher Schaffner, Nov 28, 2011, 1:09 pm

EAp2- Compliance to ASHRAE standards

CI-2009 EAp2: Minimum Energy Performance
posted by Paolo Losi on Nov 25, 2011, 6:39 am

Hi all,
we are willing to pursue LEED CI certification for our office in Italy. The only alterations we intend to do are the following:
• install new water closet features,
•...

Last reply: Christopher Schaffner, Nov 28, 2011, 12:42 pm

Including Mezzanines in the Energy Model

NC-2009 EAp2: Minimum Energy Performance
posted by Kellie Hollenbeck on Oct 13, 2011, 11:50 am

We are clear that for the total Gross Floor Area we have to include mezzanines. The project mezzanines are open to the floor below and are not used as...

Last reply: Christopher Schaffner, Nov 28, 2011, 11:54 am

Target Finder

NC-2009 EAp2: Minimum Energy Performance
posted by TEY SIUNG on Nov 25, 2011, 3:03 am

We are building a Hotel in Doha, Qatar. We are try to apply for LEED certified. While I start , I meet a Target Finder problem. This Target Finder only design for US climate. No international...

Last reply: Christopher Schaffner, Nov 28, 2011, 11:48 am

Hotel with a few buildings

LEED Guidance for Campuses and Multiple Buildings
posted by Barbra Trae on Nov 25, 2011, 3:34 am

I am working on a hotel project which comprises a few buildings (main building + some small buildings, all contain guest rooms). The project is under 1 phase and will be run by 1 operator. Can...

Last reply: Barbra Trae, Nov 25, 2011, 4:08 am

Advice on acceptable approach to credit achievement for IEQc5

NC-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Shelley Duan on Nov 24, 2011, 1:18 pm

Is a covered exterior grate system (e.g, outside a vestibule) at all high volume entryways an acceptable approach to credit achievement for IEQc5? Any advice or guidance would be most appreciated...

Last reply: BH ., Nov 25, 2011, 3:18 am

Requirements

CS-2009 IEQc4.4: Low-emitting materials - composite wood and agrifiber products
posted by Guillermo Hernandez Espinoza on Nov 24, 2011, 9:38 pm

This may seem to be a silly question, but is causing me lots of issues, is there any kind of requirement to achieve this credit other than just an all or nothing? I mean, like some relation...

Last reply: Tristan Roberts, Nov 25, 2011, 12:02 am

Elevated Floors. Do they need Floorscore?

NC-2009 IEQc4.3: Low-emitting materials - flooring systems
posted by Adriana Hansen on May 30, 2011, 10:14 am

Hi,
We have lots of projects that are seeking EQ c4.3 under LEED C&S v3 and they all have elevated floors in the owner scope.
In Brazil, we have 3 kinds of elevated floors (by...

Last reply: Petra Hajná, Nov 24, 2011, 9:34 am