| Topic | Recent |
|---|---|
Space types included in IEQ 4 credits?NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Timo Rintala on Jan 31, 2012, 6:44 am
Hi My questions conserns calculation of... Last reply: Steve Loppnow, Feb 1, 2012, 6:59 pm |
|
MERV 13 in residencesNC-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by Iris Amdur on Dec 21, 2011, 5:20 pm
Has anyone submitted a residential project that has pursued the intent of the... Last reply: Dylan Connelly, Feb 1, 2012, 6:40 pm |
|
Mixed Use- Office/ ResidentialEBOM-2009 MRc1: Sustainable purchasing - ongoing consumablesposted by Lauren Wallace on Feb 1, 2012, 2:50 pm
My project contains 12 floors of commercial office space (95% occupied), a ground floor retail (100% occupied), and 30 stories of residential (30% occupied). As I understand it, we could easily... Last reply: Barry Giles, Feb 1, 2012, 3:32 pm |
|
GroutsNC-2009 IEQc4.3: Low-emitting materials - flooring systemsposted by Bruce Maine on Feb 1, 2012, 2:00 pm
Can someone tell me where 1168 or 1113 references "grout" for... Last reply: Bruce Maine, Feb 1, 2012, 2:48 pm |
|
Master Site Rating SystemLEED Guidance for Campuses and Multiple Buildingsposted by Omer Moltay on Dec 13, 2011, 10:24 am
How does one define under which rating system the master site should be registered? We have a 220.000 m2 built area Master Site. At this moment, two office buildings in the site will be... Last reply: Elizabeth Thompson, Feb 1, 2012, 1:09 pm |
|
Vacant Space FTE User GroupEBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Kelly Witosky on Apr 21, 2011, 12:38 pm
We are working on a project that has completed the Preliminary Review Phase of Certification, this is a high-rise office building located in an urban area, with occupancy that fluctuated over the... Last reply: Dan Ackerstein, Feb 1, 2012, 12:18 pm |
|
Material and Product certifications in LEED EBOMGeneral forumsposted by Susann Geithner on Jan 31, 2012, 2:47 pm
I have received a couple of emails and inquiries from especially European project teams in regards to the standards referenced in LEED... Last reply: Sean Fish, Feb 1, 2012, 10:59 am |
|
Exemplary Performance in Stage 1General forumsposted by Daniel Costantino on Feb 1, 2012, 8:19 am
Hello, I am working on Stage 1 submittal templates and have noticed that some templates for credits which offer exemplary performance per the reference guide (e.g. GIB C4, GIB C14) do not... Last reply: Meghan Bogaerts, Feb 1, 2012, 9:42 am |
|
FTE/calc guidance for hospitalityNC-2009 WEp1: Water Use Reductionposted by Tristan Roberts on Nov 9, 2011, 12:00 am
FYI, the November 2011 addenda has two additional pieces of guidance on WEp1 calcs that are especially useful for hospitality: Last reply: Udana Ratnayake, Feb 1, 2012, 2:17 am |
|
90.1-2007 Table G3.1.1A for Additions and AlterationsNC-2009 EAp2: Minimum Energy Performanceposted by Evelyn Dicks, EI, CxA on Jan 31, 2012, 5:14 pm
Do the requirements of Table G3.1.1A Baseline HVAC System Types apply to the whole building or just to the project area for additions and alterations? I am working on a project renovating a... Last reply: Marcus Sheffer, Jan 31, 2012, 5:30 pm |
