Topic | Recent |
---|---|
ASHRAE 90.1-2007 Lighting Power DensityNC-2009 EAp2: Minimum Energy Performanceposted by Arub Vijay on Feb 14, 2012, 8:51 am
Dear All, I have a doubt regaridng the... Last reply: Arub Vijay, Feb 21, 2012, 5:08 am |
|
fireproof coatingsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Michele Helou on Jan 14, 2012, 1:40 pm
does anybody out there know if Fireproof coatings for steel are covered under EQc4.2 and how are they classified? Last reply: Maya Karkour, Feb 21, 2012, 3:09 am |
|
Anti-corrosive paints for sprinkler system and heating-coolingNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Alicja Bieszyńska on Feb 16, 2012, 9:26 am
Does anyone know if IEQ c4.2 credit also applies to anti-corrosive and anti-rust paints/primers for sprinkler system or heating-cooling instalations? Those pipes are located in the... Last reply: Alicja Bieszyńska, Feb 21, 2012, 1:26 am |
|
Non-fibrated aluminum paintNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Bruce Maine on Feb 13, 2012, 1:07 pm
This is actually a LEED for Healthcare question dealing with exterior applied products. In several roofing sections we ask for "non-fibrated aluminum paint". It seems as through 1113 (which just... Last reply: Tristan Roberts, Feb 21, 2012, 12:35 am |
|
LEEP AP,CI-2009 IDc2: LEED Accredited Professionalposted by Cyril Knabe-Nicol on Feb 20, 2012, 9:48 am
Hello, everyone, I just wanted to have clarification regarding the LEED AP, if we have in the design team or in the team undertaking the Assessment someone who is a LEED AP. Does this person need... Last reply: Tristan Roberts, Feb 21, 2012, 12:34 am |
|
Office Space With 25% Data Center Changing to 100% Office-JuneEBOM-2009 EAp2: Minimum Energy Efficiency Performanceposted by Michelle Bracewell-Musson on Feb 13, 2012, 1:21 pm
There are four buildings that are leased by the State and one of the buildings currently has 25% if it as a Data Center. They will be removing the Data Center in June and I would like to know... Last reply: Jenny Carney, Feb 20, 2012, 1:41 pm |
|
Documentation for demonstrating the sanitary fixtures flow rateCS-2009 WEp1: Water Use Reductionposted by Caroline Ma on Oct 27, 2011, 11:34 pm
Regarding the documentation to demonstrate the sanitary fixtures flow rate, can we submit a test report conducted on-site which can demonstrate the exact flow rate of the sanitary fixtures in our... Last reply: Nadia Ayala, Feb 20, 2012, 12:39 pm |
|
Paint Stripper?NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Ellen Mitchell on Feb 20, 2012, 9:16 am
I have a contractor submittal asking if paint stripper/ remover should be included in this credit and I'm not sure how to answer. In reviewing the credit requirements and... Last reply: Ellen Mitchell, Feb 20, 2012, 12:18 pm |
|
paint pasteNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Dario Ibarguengoitia on Feb 7, 2012, 5:13 pm
Which category should paint paste fall under? Last reply: Mara Baum, Feb 20, 2012, 12:00 pm |
|
Aerosol Coating Product (Spray Paint?)NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by John-David Hutchison, LEED AP BD+C, PMP on Feb 10, 2012, 2:41 pm
Has anyone found a definitive limit for spray paint - contractors often wonder what to use for marking paints. Last reply: Mara Baum, Feb 20, 2012, 11:50 am |