Hello,
About the option 1 Nonroof and Roof, we are using a natural Stone (local material), Off-White color, for the pavement in the main square and walkway. But the manufacturer can not...

Dear all,

We are working on a project to be certified CI v4. The use is a software development office, the building is 100% glazing in a very hot climate. The owner will be installing...

We have a problem with the interpretation of the information necessary to apply for this credit. Credit requirement explain that I have to meet one of the following:

Air handlers that...

Dear all,

We are working on a LEED EB project that wants to explore this credit, I understand the requirements are to monitor all energy sources, as the pre-requisite states, and...

Our project has a WSHP bigger than 135000 btu/h. According to CPG table 2.9.2 the efficiency required for WSHP up to 135000 btu/h is 14 EER and the WSHP of our project has a 14.1 EER.

...

Hello. I'm working on a Campus project that are designing a large PV installation in the roof and façade of the different building as they are built, but that will cover also areas outside of the...

Hi, I am new to LEED and looking at the energy model submitted by our consultant for the compliance on EAp2. I have a basic question. Should the base case scenario and the real project be...

Hi! I´m using this link http://www.usgbc.org/rpc to identify the regional priority credits on a project near Oaxaca, Mexico. But if I select BD+C :NC,...

What is the best option of water irrigation systems for a small on site food production?

Hi, can you kindly clarify whether the glazing percentage and floor area for the base case needs to match the project case when reviewing compliance for EAp2?