I am working on a project in Tokyo, Japan. They are considering saving part of the exitsing building...

I have a building with two conditioned zones. One is dining and another is kitchen. Both zones has no wall and air can flow through each zone freely. Can I model both zones as one zone in the...

I'm working on a model for a system designed for a small classroom building and have concerns on the proper baseline and proposed system ventilation rates. Thanks in advance for any advice or...

We are designing a 4 story building where the owner will occupy 3-1/2 floors of the building and another tenant will at some point occupy the remaining portion. Per the reference guides, this...

I am using IES VE to model hotel type rooms that each have a separate bathroom. The bathrooms do not have any heating equipment, cooling equipment or thermostats in them. But they have exhaust...

In my models (both proposed models and baseline models) the surfaces of the zones are from the inside edge of the external walls to the center of the internal partitions. Therefore the internal...

in or register to post comments Julia Weatherby President Weatherby Design & Co. Engineers LEEDuser Basic Member 94 thumbs up October 21, 2013- 4:00 pm And if you go to the forum page for EAc5 (M&V), you...

Hi all,

I'm looking for some guidance on modelling a heating system for a new school extension that will be served from the existing boiler system.

One of the options for a new...

We have a project where the team came to us after the fact and are asking about LEED certification. They have already installed a 2 pipe fan coil system. It is understood that there are other...

Hello, I have some experiences with energy modelling in eQuest, but I would like to change my software to something else. I need to advise, which of following software I can use for LEED...