We have a project with two independent buildings on a single site. One will apply for LEED-NC and the other one will apply for LEED-CS.

We decided to apply for two different certifications...

We are certifying 2 buildings within a Master Site and we have registered both of them:

Building A
Building B

Then, we have linked them with the Block Registration Tool....

Hi!
We are working on a project in which there are 2 office buildings (both will seek LEED Certification) within the Master Site boundary, but it is separated in the middle by a public road...

Hello All,

1.) What is the process for how to switch to Group if we are already registered as MS? The buildings are all performing similar and they meet the requirements for Group, so...

We have a campus composed of 5 buildings where one of them (P40) does not meet MPR 4: minimum floor area requirement of 1000sqft. All 5 buldings are within the property line, which we were...

There are a number of LEED credits which theoretically should be applicable to an entire campus (i.e. Public Transportation, Development Density, Construction Activity Pollution Prevention), but...

Question:
I have new LEED-NC project for a building on a college campus. It will be the Owner's first LEED building (and deplete any bond funding) on that campus, and they barely have...

Where can i find which credits are applicable for Mastersite?
I refered to Appendix A (AGMBC Applicability for credits and prerequisites in LEED 2009 D&C rating system) which says SSP1...

I'm working on a project that has a Master Site and 2 buildings, Bldg A and Bldg B. Bldg A is scheduled to be finished and occupied 2 years before the Master Site and Bldg B are finished. From a...

LEEDuser Basic Member 344 thumbs up August 8, 2012- 4:32 pm It's good to see that the USGBC/ GBCI took advice given on this forum and clarified what a single building with "ancillary"...