Our building is part of a campus with a central utility plant which delivers domestic hot and cold water (along with heating hot/cold water).  The best/only opportunity to meter process water in...

is worthless in my opinion and per published peer reviewed papers (referenced in this forum in the past), it might be a better way to get at least one point. Log in or register to post comments Russ Pellegrino...

Hi to all,

I cant find the Minimum Indoor Air Quality Calculator for v4.1 O+M. I noticed there are some differences in the credit intent as compared with the v4 version, for...

This project had several challenges related to exterior noise, it is in a busy area near downtown and at the time exposed to higher than typical noise levels from the exhaust system serving an...

We are got a comment on a residential project where we installed flow restrictors to reduce the faucet flow rate to 0.5 gpm. The 1.5 gpm flow restrictor is WS labelled but the installed 0.5 gpm...

Dear All,

We are certifying a new development that is using existing soils to rearrange exterior green areas. The existing soils were removed from site, properly stored, and...

Hi all,

I have a bit of a tricky situation when considering ongoing purchases. The project is a manufacturing facility out of US. The certification is only for one building with...

How have people been documenting the two education sessions? Are we to document the material that will be used in future education sessions? Because this is a new construction project the...

ragesh ramadas Sr.Architect,LEED Coordinator Shapoorji Pallonji Mideast LLC LEEDuser Premium Member 1 thumbs up July 28, 2019- 8:47 am https://leeduser.buildinggreen.com/forum/nauf-low-emitting-calculator-comp-wood hope the above link helps. Log in or register to post comments America Alva Page LEEDuser Premium Member September 15, 2019- 2:18 am I have the same question about an HPL on my project.  I got the same answer from the manufacturer that product is exempt.  Did you get any additional information on this topic? Log in or register to post comments Linda Davisson Senior Consultant Sustainable Design...

I have been recently told that I need more proof on the distance of the Steel Mill to the job site to justify regional materials.

I submitted the Mill Certs which list the Steel Mill name...