We have a project that is not required to do site contamination testing, and does not believe there is any reason for the site to have contamination (they have always owned the site), so they did...

Hi all,

Working on a project that had some old diesel and fuel tanks and lines on the site identified as APECs during Phase 1, so phase 2 was conducted by found no significant levels of...

Our project is located 2 blocks from the nearest...

I am working on a project in a rural NC town which has a...

Our project site is determined to be eligible for the National Register of Historic Places. Does this eligibility satisfy the requirement?

Thanks in advance for your feedback.

https://leeduser.buildinggreen.com/forum/final-design-review-language-is... I'm sure there are other related posts, but that's what I could locate the quickest. Log in or register to post comments Emily Purcell Sustainable Design Lead CannonDesign LEEDuser Expert...

Is there a year before which a building can be consider historic for USGBC?

Okay, I'll start this off by stating the requirement, and then asking a (simple) question.

LEED v4 requirement: Locate on a brownfield where "soil or groundwater contamination has been...

The project conducted a Phase I ESA and concluded that there maybe potential for chemical vapor intrusion to indoor air from off-gassing associated with the groundwater plume, therefore a phase...

Hi, my project located in an old district where has a lot of old architecture buildings around with tourist. The problem is the paperwork to obtain letter/document from Gov saying this district...