We are currently working in a residential project. It will probably be a C&S due to the project scope.
Some residential units have private balconies. These balconies are located within...

Dear all,
our CS project has one designated smoking room to be constructed within CS. We would like to go for a split review. Credit is asking for differential pressure measurement. Since...

Hello,

Our project has a 1-story annex building which is separated from the...

We prohibit smoking in our office buildings, but have a central plaza which will provide designated smoking area. Question: does that designated smoking area need to be covered? Thanks!!

Hi,

I am working on a LEED CS project with a single tenant. The tenant has a no-smoking policy and is providing signage throughout the property and building. Would it be acceptable for the...

According to the reference guide, there are:

CASE 1 OPTION 1, where smoking is prohibited,
CASE 1 OPTION 2 (Non-residential projects), where smoking is prohibited except in...

Dear Leedusers,

our project will include one smoking room within a restaurant space. However, the tenant will construct this smoking room during his fit-out works and therefore we are...

Our project is a C&S building with a restaurant on the ground floor. A tenant has been already appointed but he wants to have his restaurant meant for smokers. My question is: is it possible...

Our Blower door tests of the residential top floor of a mixed use building reports the findings as Total Airflow through the door seals [m3/h] at a given pressure differential [Pa]. The also...

Hi!

I'm working on a project of a multifamiliar building and we've chose Option 2, Case 2.

It's prohibit to smoke in all common areas, except on a specific area more than 25 ft from...