Hi every one, Marcus

I am doing data center energy modeling for LEED V4.

The data center is composed of 3 type spaces.

Usage : dedicated data center

...

My project is located in South Korea, so I open fall into difficulties to interpret manufacture data. 

About Spray adhesives, material has voc g/l  limit and Greenguard certificate. 

My project located in South Korea. So I often fall into difficulties to interpretation manufacture data.

The material is "Scotch-WeldTM Hi-Strength Postforming 94 CA".

As per the...

Dionisio Franca Director Woonerf Inc. LEEDuser Premium Member 30 thumbs up February 13, 2018- 2:20 am Hi Jeong, The LEED Online did not ask for demand-response participation, only for a charger that is addressable. Please read this thread too:  https://leeduser.buildinggreen.com/forum/grid-interactive-charging-stations I hope this helps. Log in or register to post comments ...

Hi all,

Is there any alternative when our team cannot implement 25 feet smoking prohibition policy due to a restricted project area?

Hello, I have a question about the EB certification process since it is my first job having work on O+M project. I would be very thankful if I would be able to get any answer on it here.

...

Is there a different Table 1: ASHRAE 90.1-2013 Appendix G percentage Improvement that we can use for those projects under LEED v4 but using ASHRAE 90.1-2013?

If so, please forward.

...

Hi, all

Our team had a technical advice from USGBC reviewer, the comment is like below...
" The LEED form indicates a total...

Dear LEEDuser team,

I have two questions for a new building to be built within the area of an existing LEED ND project (or very near).

1. How can the project team know the exact...

Hi,

We have a warehouse project for which the Core&Shell will be built in a first time, and the owner will perform the fit-out himself a few years later.

The question is can we...