Topic | Recent |
---|---|
EBOM Project Occupancy DoubtEBOM-2009 IEQp1: Minimum indoor air quality performanceposted by Marina Andrade on Dec 8, 2014, 5:51 am
Hi everyone, I’m working on a project and I have a doubt about occupancy in the... Last reply: Dave Hubka, Dec 8, 2014, 9:56 am |
|
Zone Calculation Ds% for VAV SystemNC-2009 IEQp1: Minimum indoor air quality performanceposted by Marina Andrade on Oct 30, 2014, 8:35 am
I received this question in IEQp1: "The ventilation calculations indicate that the value of the flow rate of air projected under the condition tested (DS) was modeled as 100% level for... Last reply: Rudolph Carneiro, Nov 17, 2014, 10:08 am |
|
Natural ventilation on a hangarCS-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by Renato Sandoval on Nov 3, 2014, 8:18 am
I am working on a hangar ventilated naturally by a clerestory on the roof top. This project would be applicable to the credit IEQ.c5 ? Last reply: Michelle Halle Stern, Nov 3, 2014, 10:10 am |
|
DCV vs IEQp1NC-2009 IEQp1: Minimum indoor air quality performanceposted by Marina Andrade on Oct 13, 2014, 9:41 am
Hi everyone! I have a project that the system works with outside air demand according to the CO2 sensor. ... Last reply: Lawrence Lile, Oct 29, 2014, 12:59 pm |
|
Stadium seating- need SRI? Is it an appurtenance/usable space?NC-2009 SSc7.2: Heat island effect - roofposted by Marcio Alberto Casado Pereira on Oct 13, 2014, 9:36 am
We just got a review from a stadium Project we are working on in Brazil and the review team asked us to double check the... Last reply: Kathryn West, Oct 27, 2014, 8:57 pm |
|
Pressure Drop AdjustmentNC-2009 EAp2: Minimum Energy Performanceposted by Marina Andrade on Oct 17, 2014, 8:10 am
How do I set which the fan power limitation adjutment... Last reply: Francesco Passerini, Oct 22, 2014, 11:13 am |
|
LEED v4 rating systems being translated to PortugueseGeneral forumsposted by Tristan Roberts on Oct 20, 2014, 12:22 pm
USGBC is translating the LEED v4 rating systems to Chinese, Portuguese, and Spanish, and they passed us an advance copy to get your feedback! |
|
External Lightning ExceptionsNC-2009 EAp2: Minimum Energy Performanceposted by Marina Andrade on Oct 14, 2014, 6:30 am
Hi everyone, It is necessary to prove the power... Last reply: Marina Andrade, Oct 14, 2014, 8:54 am |
|
Time Setpoint No Met & Setback TemperaturesNC-2009 EAp2: Minimum Energy Performanceposted by Marina Andrade on Oct 13, 2014, 9:52 am
Hi everyone! I've some doubts about this points. Whats is the setback temperatures? The time setpoint not met is calculated only in the occupied hours? I ask this because the air... Last reply: Marina Andrade, Oct 13, 2014, 1:09 pm |
|
Glazing specifications for existing buildingCS-2009 EAp2: Minimum Energy Performanceposted by João Costa on Sep 30, 2014, 11:01 am
Hi, I am developing a simulation (EAP2/LEED CS) for an existing building located in Rio de Janeiro. According with the Table G3.1.5, for the Baseline: "Existing Buildings: For... Last reply: Marcus Sheffer, Oct 4, 2014, 5:13 pm |