Sunayana Jain L&S Energy Services LEEDuser Basic Member 4 thumbs up February 3, 2014- 8:49 am I am looking for forum's responses quickly. Your views will be appreciated. Log in or register to post comments Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5738 thumbs up February 17, 2014- 12:13 pm Free and fast, pick one.:-) As long as your fan motors are less than 5 HP they do not need to comply so you should be fine under option 1. The previous version of CPG also says "and". For an international project I would think that if you can demonstrate that it meets...

Hello everyone,

I'm working in a smal project (just 2 floors) that is naturally ventilated overall.
The thing is that we're thinking about installing air conditioning equipment for...

Option 1 of this credit states that all motors 5 hp and greater must have VFDs that decrease fan power to 30%. If none of the installed fan motors are 5 hp or greater, can this credit be...

The project can comply with the requirements of the credit if the project team can show that the relevant criteria have been met for all HVAC systems serving the area within the project scope,...

Hello Marcus.

We have a project that will be applying for LEED certification under CI. The project is located on 4th floor within an office building with 5-floors. The building is served...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5738 thumbs up December 31, 2013- 11:31 am You can get credit for an efficient central plant. There are also scenarios in the modeling protocol to get credit for envelope improvements in some cases. The baseline system is defined by Section 11 or Appendix G in all cases. The best guidance on how to do this modeling is in the ID+C Reference Guide so do not rely on this forum for definitive guidance in all cases. This especially applies to any advice i may have provided.:-) Log in or register to post comments ...

If we specify a new air handler that uses steam and chilled water from existing systems, do these systems need to comply with the CPG efficiency requirements? We are looking to use Option 1....

We plan to option 1 equipment efficiency.
1 We have 500,000+...

How and in what way can points be obtained specifically related to a high-effiency HVAC motor in a retro-fit scenario?

Hi, does a damper actuator qualify as an active control?

Per...