Hello, Thank you Tristan for adding a WELL discussion to this site. My rpoject is an 18 floor residential project. The staircase is use for Fire exits. But to achieve the Feature 64， the accessor...

my Project is in Shanghai China.I am preparing PI Form form my project. Now I have a question about parking area. our office located in a high rise building,we only rent one floor of this...

Hello!
I have a question about EAc3 for...

Jareb Ketay Principal GHT Limited LEEDuser Premium Member 4 thumbs up July 19, 2016- 8:42 am Hello Erin, First thing's first.. and this probably sounds like a silly question given which part of the forum we're in.. but is this a LEED v4 project? I just want to confirm because the level of detail expected of a v4 project is going to be arguably greater than that of a v3 OPR/BOD. I think you're general assumption about the gist of an OPR is correct, though. I've worked on more than a few LEED projects (NC and CI), and the level of detail I've seen runs the gamut. There needs...

Hello Everyone,

I have an office project which is designed to use a little compicated HVAC system. There are 3 Central Heat Recovery Units on the roof top to provide pre-cooled/heated...

Hello!
We have a canteen project in Shanghai. The building has three floors, total GFA is 64,067 square feet. The baseline HVAC system type is system 6.
In the second floor, there are...

I have a project, which have two types of system:
1. OA system offering the fresh air to each room, and each room has an individual fan coil unit .
2. OA system offering the fresh air...

Hi,
We are pursuing Option 2B: Energy Baseline including Historical Data for minimum energy efficiency, the weather normalized Energy Use Index from Energy Star Portfolio Manager during...

a small printing room in an open office, no...

Hello! I had submit a project for cs2009, and got some comments confused. The project is a high rise building consists of retails, restaurants and offices.

1. Table 1.4.6 and Table 1.4.7A...