We're working on an energy modeling configuration and  filling the Section 1.4 Table: The project includes a mechanical room on the roof floor which is not entirely unclosed, it has a steel deck...

certification, and then cross-checked that section with the other sections of the guidelines to make sure it was consistent. You can find an example of a submission on the forum page dedicated to CS v3, SS Cr...

By completing the three-year monitoring plan, what would be the follow-up to the plan?

Hi! does the use of thinner for cleaning purposes falls within the scope of this credit?

Do we have to comply with the requirements of the rule 1143?

Thanks!

Hi! does the use of thinner for cleaning purposes falls within the scope of this credit?

Do we have to comply with the requirements of the rule 1143?

Thanks!

The construction team want to know if the thinner used to clean the formwork for concrete slabs in the post-tensionnnig method have to comply with the...

Hello everybody. We have a V4 interior certification design for HVAC in a building that is LEED V3, so the C&S infrastructure do not have a...

We are currently working on a CS building of 146,617 sqm. The calculations according to the Reference Guide requirements, result in 734 racks and 99 shower/changing facilities. Is it possible to...

Hi, 

We are working in a Healthcare facilities project. How can we document compliance with the minimum Outdoor Air Changes required by ASHRAE 170-2008 Table 7-1?

How can we...

We have a project that has terraces in some floors, the issue is that the terraces have a roof but they are not enclosed. Can we count this area as open space?

Thanks in advanced...