| Topic | Recent |
|---|---|
Acceptable thermal conditions in naturally conditioned spacesNC-2009 IEQc7.1: Thermal comfort - designposted by Panupant Phapant on Jan 27, 2015, 3:10 am
There is a cafeteria where the HVAC designer of record intends to have it naturally conditioned. According to ASHRAE 55-2004, naturally conditioned spaces must be equipped with operable windows... |
|
Envelope materials with no provided u-valuesNC-2009 EAp2: Minimum Energy Performanceposted by John Covello on Jan 22, 2015, 5:08 am
Hello, On our project we are getting supplied from local contractors materials like sandstone, granite, reused teak... Last reply: Marcus Sheffer, Jan 22, 2015, 4:50 pm |
|
Mechanical Ventilation using local codeNC-2009 IEQp1: Minimum indoor air quality performanceposted by MOHD HAFIZI MOHAMAD on Jan 20, 2015, 11:03 pm
Hi. Is it a compulsory to design mechanical ventilation by using local code even if ASHRAE Standard is more stringent in order to score IEQ Credit 2: Increased Ventilation? I got a... Last reply: MOHD HAFIZI MOHAMAD, Jan 21, 2015, 9:37 pm |
|
VOC limit for acrylic based industrial enamel paintsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by ABDUL MUTHALIB MOHAMED on Jan 20, 2015, 4:41 am
The project is a 2 storied garment factory located in Bangladesh where they use Industrial Enamel alkyd based paints which has a... Last reply: Jon Clifford, Jan 20, 2015, 8:45 pm |
|
VAV boxesCS-2009 EAp2: Minimum Energy Performanceposted by Rathnashree Bharadwaj on Jan 8, 2015, 5:05 am
We request for a clarification regarding mandating the tenant to use the... Last reply: Marcus Sheffer, Jan 8, 2015, 9:16 am |
|
How to prove compliance with Mechanical VentilationNC-2009 EAp2: Minimum Energy Performanceposted by Praveenbabu Rajkumar on Dec 17, 2014, 4:53 am
The project is a medium sized workshop shed and will be mechanically ventilated with fans with a particular air change per hour as per the local standards. The client wants this to be LEED... Last reply: Praveenbabu Rajkumar, Dec 23, 2014, 1:26 am |
|
Process load significantly lower than 25%NC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 18, 2014, 2:20 am
The overall process load of our project turns out to be in the vicinity of 15% only. We are aware that 15% is absurdly low and unusual for plants. The factory owner, nevertheless, sent us a full... Last reply: Jean Marais, Dec 19, 2014, 8:43 am |
|
VAV Fan control for baseline system 6NC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 16, 2014, 11:37 pm
We have a rough time seeking to reduce supply fan energy during energy simulations. Could anybody throw some light on the following account: 1.) The project on hand is a plant that... Last reply: Marcus Sheffer, Dec 18, 2014, 10:02 am |
|
Heat gain originating from hooded equipment in energy modelingNC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 17, 2014, 2:16 am
I am doing energy simulations for a factory. I am seeking advice as to the following situation: 1.) Part 1: Load Estimating, Chapter 7 of the classic Carrier Manual states that “a... Last reply: Marcus Sheffer, Dec 17, 2014, 10:15 am |
|
Job Specific Environment AnalysisNC-2009 SSp1: Construction Activity Pollution Preventionposted by Yodi Danusastro on Dec 12, 2014, 2:58 am
Does anyone has the template of JSEA? I've been ask to create... |
