My current CS Project using the water saving fixtures and saving the water up to 36% Reduction and our project will used the gray water from waste water treatment plant for all the flush fixtures...

Dear All
We have two projects that are attempting LEED 2009 NC Certification the first one is office building with server room and the second one is Arg Gallery. Both projects use precision...

Hi,
My project is a factory building. They are installing only Indian Water Closets and no Urinals. How to calculate water efficiency if Urinals are not used? Can we give flow rate as 0 and...

Is it a mandatory requirement to install a domestic hot water system in a LEED project?

In our project location, it is clear that no tenants will go for a heating system. The...

I am doing a project in Lahore, Pakistan for the British Council. It is a 6,000sf library located on a 50,000sf site. The site has two entrances flanked by guard rooms, a prayer area, storage...

Which one from the table that suits for Synthetic Gloss Enamel paint, that use for painting metals?

Project Description:

The project is approximately 3.0 lack Sft which is G+10 floors and going for LEED CI rating. The 9 floors in the project is office space and remaining one floor is...

i want some clarity on whether it is necessary to include Lift lobbies in VRP calculation to demonstrate compliance under IEQp1 and IEQc2? These lift lobbies are not regularly occupied. Hence is...

In IEQp1 i already Upload 62MZcalc and Results from a Simulation Software and Fill the narrative Tab and all other but my check compliance is still indicate (Y)

so my Doubt Whether we...