Since the energy model is based off of an existing building. Do I still need to perform parametric rotational runs (0 deg, 90 deg, 180 deg, and 270 deg) for a baseline model based on the...

Hi,

I'm working on a pre-assessment for a project in Morocco and would like to see the minimum wall insulation.
I checked in ASHRAE 90.1-2010 but Morocco is not listed in Table B3...

Hello all,

We have an office project which utilizes waste heat from the neighbor landfill gas plant. The plant and office is owned by the same company. The plant produces electricity from...

Hi,

Is there any limitations in LEED V4 regarding...

Hello,
I have a question regarding equivalent standards : Is there an USGBC approved equivalent standard for projects located in France ?

Many thanks in advance for your assistance...

The 90.1-2010 User's Manual states:
"In some cases, a complete HVAC system already exists (...) the proposed building and baseline building models are the same and are based on the existing...

We are building an addition to an existing building that has a central plant that is outside of our LEED boundary. However, we also have a contract to improve the performance of the central plant...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5916 thumbs up April 26, 2017- 9:45 am I think this would be possible with some type of water cooled condenser. Without going into the program and trying to figure it out I can't give you a step-by-step set of instructions. For LEED if it can't be modeled directly a work around would be required. If it is required make sure to follow G2.5 and provide a thorough narrative describing the work around. You might also consider posting your question on the eQUEST users forum at onebuilding.org. Someone there would be more likely...

If the envelope is demolished and then rebuilt with the same shape does Table G3.1 part 5., baseline, point f apply? It states: "For existing building envelopes, the baseline building design...

Can the document "Treatment of District or Campus Thermal Energy in LEED V2 and LEED 2009 – Design & Construction" be used also for LEED v.4? Any news about an updated version of that...