Hi all,
Could anyone clarify if Ireland is in climate zone 5A or 5C?

Thanks in advance

In case you have not seen this relatively new guide I would highly recommend it to help with your modeling issues.

ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference...

Hello,

We have a speed skating oval project. Should the energy used for ice rink modeled as process load? We think this will be the major energy consumption. Can we consider the energy...

Since the energy model is based off of an existing building. Do I still need to perform parametric rotational runs (0 deg, 90 deg, 180 deg, and 270 deg) for a baseline model based on the...

Hi,

I'm working on a pre-assessment for a project in Morocco and would like to see the minimum wall insulation.
I checked in ASHRAE 90.1-2010 but Morocco is not listed in Table B3...

Hello all,

We have an office project which utilizes waste heat from the neighbor landfill gas plant. The plant and office is owned by the same company. The plant produces electricity from...

Hi,

Is there any limitations in LEED V4 regarding...

Hello,
I have a question regarding equivalent standards : Is there an USGBC approved equivalent standard for projects located in France ?

Many thanks in advance for your assistance...

The 90.1-2010 User's Manual states:
"In some cases, a complete HVAC system already exists (...) the proposed building and baseline building models are the same and are based on the existing...

We are building an addition to an existing building that has a central plant that is outside of our LEED boundary. However, we also have a contract to improve the performance of the central plant...