Log in
Forum » U.S. and Canada

Microturbines and gas rates for energy modeling

NC-2009 EAc1: Optimize Energy Performance
posted by Sherman Aronson on Oct 29, 2014, 9:55 am

For a high rise project the client is considering investing in micro-turbines to generate electrical power on site from natural gas. The utility company will provide the fuel at a reduced cost to...

Last reply: Sherman Aronson, Nov 3, 2014, 8:51 am

Baseline System configuration for mixed use condominium

NC-2009 EAp2: Minimum Energy Performance
posted by Jason Biondi on Oct 31, 2014, 9:55 am

We are working on a 10 story mixed use building consisting of approx. 11,705 SF of conditioned retail, office and support areas, common lobbies and utility areas on level1 and clubroom and...

Last reply: Marcus Sheffer, Nov 2, 2014, 6:51 pm

additional heating system

NC-2009 EAp2: Minimum Energy Performance
posted by Alfonzo Collins on Oct 28, 2014, 12:16 pm

I am working on a high-rise residential building with VRF. The building envelope is heavily glass, so the owner has decided to also install a hydronic heating system at the building perimeter....

Last reply: Marcus Sheffer, Nov 2, 2014, 6:35 pm

More Info on Program is Needed

General forums
posted by Melissa Wrolstad on Oct 15, 2014, 11:58 am

There is not very much information released on the program yet, even if you speak directly with representatives of the program and drill them with pointed questions.

Last time we checked...

Last reply: Kathryn West, Oct 31, 2014, 4:31 pm

Requirements for Copy/Printer Rooms

CS-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Sean Blaevoet on Oct 30, 2014, 6:47 pm

Does LEED require the copy/printers to be in a separate room with doors?

Last reply: Michelle Halle Stern, Oct 31, 2014, 11:45 am

Press Release Location

General forums
posted by Suzanne Johnson on Oct 29, 2014, 10:01 am

I have not been able to find the referenced press release to share with clients. Please let us know where to find it.
Thank you.

Last reply: RETIRED, Oct 31, 2014, 9:30 am

Should LPD Area match with Gross Project Square Footage?

CI-2009 EAc1.1: Optimize energy performance - lighting power
posted by Sunayana Jain on Sep 23, 2014, 11:34 am

I have a project in which my calculated area by space by space method is slightly more than the area inserted by LEED Admin in "Gross Project Square Footage". Should these numbers match?

Last reply: Jon Clifford, Oct 30, 2014, 3:43 pm

NAUF & CARB Formaldehyde Compliant

NC-2009 IEQc4.4: Low-emitting materials - composite wood and agrifiber products
posted by Lilian Seow on Sep 18, 2014, 6:45 pm

LEED 2009 [Canada] - IEQ 4.4- NAUF


Last reply: Jon Clifford, Oct 30, 2014, 3:20 pm

Commercial Kitchens

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Lawrence Lile on Oct 25, 2014, 1:53 pm

A typical commercial kitchen has a large makeup air unit that provides air to a hood over the cooking surfaces, several exhaust fans, and (in our case) a large central cooling-only 0% OA...

Last reply: Aaron Dahlstrom, Oct 29, 2014, 5:09 pm

LEED-H Water Use

Homes-v2008 WEc3: Indoor water use
posted by Robyn Vettraino on Oct 29, 2014, 12:48 pm

Is there a tie-in somewhere that requires individually metered homes/units in LEED for Homes?