Hi! I'm working on a project in India. We cant obtain the utilities rates so we were trying to use the deafault EIA rates like other projects we did in the US. However it looks like EIA.gov does...

I am working on a project which is a facililty that tests tools used in semi-conductor fabrication facilities. The spaces are clean rooms with strict control of temperature, humidity, and...

Hello, 

There are two Paths in ASHRAE 90.1-2010 Table 6.8.1c water chilling packages -Efficiency Requirement, just would like to know what is the different between path A and path B?

Hi All, I have read som many answers regarding  the baseline system for Data centers, Some are saying use system 8 some are saying use system 3 and 4, which one is the right system? I am working...

Hello Marcus, 

I have unique scenario in which I believe the answer is 'No' but cannot find a definitive answer. 

My project contains 6 floors of parking and 12 floors of...

Dear LEED Experts...

 I am involving one energy model work. It is factory production type Building.That project Installed equipments total power in KW-150. if i feed this total energy...

Hello everyone!

I am working on 2 buildings that are registered in one project following the group approach.

We did not report the buildings seperatly on the MEPC in the first...

Hi there,

I am currently calculating the power allowance for exterior lighting in a school project.

In this case, there is quite a lot of exterior spaces and landscaping. Almost one...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5867 thumbs up April 21, 2023- 7:11 pm This question is very software specific and is more appropriate for the software developer than for a LEED forum. Perhaps you want to restate it? Log in or register to post comments ...

Hi,

In ASHRAE std. 90.1 2010 section 6.4.3.3.2 it is stated that systems shoud have controls that have the CAPABILITY to automatically restart and temporarily operate the...