Log in
Forum » NC-v4 MPR2
Topic

Is underground Parking included in Certification fees calculations?

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Amine Zeidane on Sep 18, 2018, 11:42 am

Deborah Lucking Director of Sustainability Fentress Architects LEEDuser Expert 245 thumbs up September 19, 2018- 11:36 am From a discussion we had in 2016: https://leeduser.buildinggreen.com/forum/loading-dock-and-parking-be-counted-gross-floor-area "In ASHRAE-90.1, the definitions of the various types of enclosed “space” to be included in the gross floor area include the note, “Crawlspaces, attics, and parking garages with natural or mechanical ventilation are not considered enclosed spaces.” Typically garages are deemed "unoccupied" and excluded from LEED GFA for fees. Log in or register to post comments ...

Last reply: Deborah Lucking, Sep 19, 2018, 11:36 am

New V4 Project Boundary Overlaps Existing V2009 Project Boundary

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Doug Shilo on Nov 14, 2017, 1:44 pm

An existing V2009 Project is getting an expansion that will fall under V4. These will be separate structures connected on each floor, and the expansion falls right in the existing project's LEED...

Last reply: maria esther lamadrid, Jul 27, 2018, 11:17 am

LEED Project boundary

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Neetika Parmar on Feb 9, 2017, 12:05 am

Our Project is an Office cum warehouse. The area distribution is:

Office- air conditioned with an area of 4 000 sq.ft (G+1)
Warehouse- non air conditioned with an area of 84 400 sq...

Last reply: Nadav Malin, Jun 12, 2018, 1:37 pm

Excluding adjacent park from LEED Boundary

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Chad Thurlow on May 30, 2018, 11:43 am

Hello

I dealing with a project where an adjacent park mostly made of turf grass is being installed beside the building going for certification. Both the building and the park are owned by...

Building Add-on to Design-Build Parking Structure

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by GBD Architects on Dec 19, 2017, 1:34 pm

We are pursuing an office project that would be essentially an addition to a parking...

Last reply: Summer Minchew, Jan 4, 2018, 12:13 pm

Small addition to existing building

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Edmée Knight on Dec 11, 2017, 5:53 pm

Our project is a small addition (<10% of total building GSF) to an existing building. The new addition will be tied to the existing buildings HVAC system and will consist of a lobby and some...

Last reply: Tristan Roberts, Dec 12, 2017, 5:19 pm

new building on site with existing buildings- LEED boundary?

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Courtney Royal on Feb 27, 2017, 1:18 pm

Our project is a new construction building and will be constructed on a site that already has 2 other structures. One of the structures is a retail space, that some of the employees from the new...

Last reply: Tristan Roberts, Jul 7, 2017, 4:36 pm

Single certification for physically distinct structures

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by NAMRATA GUPTA on May 21, 2017, 7:34 am

We are pursuing LEED for a hotel cum resort project with 80 individual villas plus main admin block, spa block, utlity blocks etc. None of the buildings have an area of more than 25,000 square...

Last reply: Tristan Roberts, Jul 7, 2017, 4:17 pm

LEED Certification for a portion of a building

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Eesmyal Santos-Brault on Jun 21, 2017, 5:41 pm

Hi there,
I am working on a 17 storey residential project with social housing on the podium levels (3 storey). The social housing part has a separate entrance, mechanical and electrical...

Last reply: Charalampos Giannikopoulos, Jun 22, 2017, 6:02 am

BD+C New Construction- New Stadium

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Quentin Jackson on Feb 22, 2017, 8:19 pm

Hi all, I'm preparing to register a new project (new stadium) and would like to double check that it is a 'single building'. There will be retail shops/box offices/function rooms/storage sheds/...

Last reply: Summer Minchew, Jun 7, 2017, 1:41 pm