Hello

Our current core&shell project does not include sanitary installations, which will only be built at tenant fit-out stage. LOv3 for core&shell produces generic data based on...

We are employing 0.5 gpm lav fixtures with sensors and timed cut off at 10 seconds. Can we factor those to 0.125 gpm because the average use will be say 20 seconds?

according to the picture you see on the books for pre-requisites, I want to know if there is any restriction of use of toilets and urinals with fluximeters, or just in all cases require only that...

Our project is In Italy and most of the cutsheets, certifications and declarations that we have are written in Italian and not in English.
Do we have to traslate all the documentation or we...

Hi,

WEc1 Water Efficient Landscaping allows the use of "water treated and conveyed by a public agency specifically for nonpotable uses" for the water saving calculations. Is the same...

I am having trouble completing the WEp1 form. Since there won't be any fixtures installed as part of this C&S project, there is no fixture schedule to upload. Compliance will be shown on the...

I am working on a project where there are no core spaces and all of the fixtures will be provided by the tenants. The building owners have signed a contract to fill half of the building with...

Where can we find this?
Thanks

Within a typical fitness center including a sauna there are different types of showers.
1. The "normal" showers located near the changing rooms an lockers.
I assume every visitor uses...

What would be the absolute minimum that a LEED CS tenant agreement would have to specify to get some level of LEED certification?

WEP1 is the first hurdle - to get 20% water reduction you...