Log in
Forum » Italy
Topic

Rainwater Collected for Irrigation

NC-v4 SSc4: Rainwater management
posted by Andrea Valentini on Apr 2, 2019, 6:47 am

Hi Andrea, LEED Guide says ''All runoff from the chosen percentile of precipitation events must be managed such that there is no surface discharge from the site. Techniques include, but are not limited to, infiltration, storage and re-use, bioretention, open-grid pavement, and the reduction of impervious area.'' So, I guess it is to use all those techniques that best mimic the natural hydrological conditions before any development occurred. And I read it in this forum that only storing and reusing the runoff volume does not comply with the requirements. However, if it is solely used...

Last reply: Shannon Oletic, Jul 2, 2021, 9:42 am

glare-control devices for C&S

CS-v4.1 EQc4: Daylight
posted by Francesco Passerini on Jul 15, 2019, 10:32 am

Hello, the reference guide states: "Provide manual or automatic (with manual override) glare-control devices for all regularly occupied spaces".

Is that mandatory for spaces occupied by...

Last reply: Dave Hubka, Jun 3, 2021, 4:22 pm

ventilation of unconditioned warehouse

NC-v4 EAp2: Minimum Energy Performance
posted by Francesco Passerini on May 4, 2021, 6:14 am

Is the ventilation of a unconditioned warehouse considered...

Last reply: Marcus Sheffer, May 14, 2021, 3:35 pm

Condenser heat recovery pump

Healthcare-v2009 EAc1: Optimize Energy Performance
posted by Davide Liviero on Apr 23, 2021, 3:12 am

Hello everyone,

I am modeling a hospital which is served by district coooling, which I am modeling using Option 2 of the guidance (...

Green Education

CS-v4 INc1: Innovation
posted by Gloria Rozzini on Mar 12, 2021, 11:49 am

We are pursuing the green education innovation credit.  We were wondering if in lieu of a site visit (not practicable with the current pandemic) we can prepare articles/presentations of the site...

Last reply: Azfar Mohamed, Apr 2, 2021, 10:39 pm

Heat pumps powered by 100% renewable energy (REC)

CS-v4 EAp2: Minimum Energy Performance
posted by Giuseppina Amorusi on Mar 23, 2021, 4:36 am

Goodmorning,

I’m working on the project that has different heat pumps water to water.

I know that the heat pumps are not considered...

Last reply: Marcus Sheffer, Mar 23, 2021, 1:22 pm

Fresh air/Outdoor air through infiltration

CI-v4 EQp1: Minimum indoor air quality performance
posted by Mahesh Shankar on Jan 28, 2020, 5:16 am

I am working on a CI project which is a factory/office space. The...

Last reply: shashank gangil, Feb 15, 2021, 9:21 pm

Centralised temperature control

LEED v4.1 Discussion Forum
posted by Davide Liviero on Feb 8, 2021, 11:28 am

Hello everyone,

We are designing an office building and we are pursuing LEED v4.1. Since almost all the internal partitions are made of glass, we are struggling to find a suitable solution...

partially heated space

Warehouses-NC-v4 EAp2: Minimum Energy Performance
posted by Francesco Passerini on Jan 28, 2021, 12:13 pm

In the building I am modelling there is a big warehouse that is heated partially only (where the workers are more active, i.e. close to the loading bays). In the model could I divide the...

Last reply: Marcus Sheffer, Jan 28, 2021, 2:05 pm

Warehouse renovation: insulation required per ASHRAE 90.1-2010?

NC-v4 EAp2: Minimum Energy Performance
posted by Alessandro Zuanon on Jan 28, 2021, 5:11 am

in or register to post comments 0 Vote up! Yes I am certain. I have answered this same question multiple times on these forums. Specifically it says- 5.4.1 Insulation. Where insulation is required in Section 5.5...

Last reply: Alessandro Zuanon, Jan 28, 2021, 10:35 am