Hi all,

I have a doubt related with the Minimum Energy Performance Calculator for v4. 

In "Performance_Outputs_1" tab, particularly in "Performance Rating Method Compliance report"...

Hi All,

We are working in a pharmaceutical industry project which has a conditioned area of 78000sq.ft; as per ASHRAE 90.1 2010 the baseline case system is System 6 – Packaged...

Hi, I am trying to work out how to apply Addendum ah for ASHRAE 2010 for system 5-8

"G3.1.3.18 Dehumidification (Systems 3 through 8). If the proposed design HVAC system(s) have...

Hello,

I'm working on an office building with a DataCenter. The Energy Model shows an energy gain of 1,4 % for the Data Center which doesn't achieve the minimum requirement threshold of 2...

I'm modeling a commercial building that has 7 conditioned floors and is heated and cooled by 3 electric heat pumps. According to TABLE G3.1.1A the baseline model should be a System 8....

In exception C in section G3.1.2.6 Ventilation, it states that 'If the minimum outdoor air intake flow in the proposed design is provided in excess of the amount required by the rating authority...

My project is an addition to an existing facility, so the CHW and HHW comes from a district plant.  I am modeling the plant as cost neutral, purchased CHW and HHW in baseline and proposed.  My...

Hello,

I´m modeling the garage fans in Proposed building in the following manner: double speed drive (1st step:50% airflow; 2nd step: 100%) with CO sensors located arround the park. When...

We have a laboratory with high-powered experimental equipment. High-power experimental equipment consumes a very high percentage of electricity. 
The experimental equipment is used to...

We have a hotel with 4,000 SF of retail at the lower level of a new construction hotel project? How do we sepperate the two projects if they have a central energy plan for chilled water?