Hi all!

I am working on a residential building with a large leisure area. One of this leisure area is the...

If our project has a water reduction of 30% but is not installing any urinals or kitchen taps, what clauses should be included for the tenant? Should the tenant be obliged to install fixtures and...

Do I have to use the 3.5 gpf for baseline and installed blow out fixture if installed fixture is lower than 1.6 gpf. (3.5 gpf seems to be a mandatory requirement if fixture, tipically blow out...

Is there a minimum implementation of sanitary fixtures? We have a project where only the administration area will install the fixtures and the rest of the leased spaces will be left regulated by...

I am working on a multi-residential building. Every apartments includes one bathtub. Are these calculated as Shower or ignored in the water use calculation?

Retail...

The building what we are certifying does not have kitchens or canteen. It only has pantry/breakout areas wherein people have snacks and beverages. There are sink in the Pantries which is...

When calculating for a low-flow fixture, it is required to enter a duration (which is default set to 30 seconds). There is a footnote that says "Duration may be modified for special...

We completed the Design Submittal when there was no tenants = no information on their fit-out space. Right now, one of our clients want to include additional tea room with kitchen sink. Do they...

Hi,
I have doubts regarding showers for bicycle racks calculations for WEp1. In theory only certain group of office staff will use them, so should I create a specyfic extra group (in table...